Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   3D Animation and Competition (http://www.chiefdelphi.com/forums/forumdisplay.php?f=9)
-   -   Problems Uploading to Streamline (http://www.chiefdelphi.com/forums/showthread.php?t=34946)

Scott Ritchie 18-02-2005 22:04

Problems Uploading to Streamline
 
I've been trying to upload our animation to Autodesk Streamline, but it always times out. The file is 118MB, well under the 250MB limit.

Any suggestions?

Ryan Dognaux 18-02-2005 22:05

Re: Problems Uploading to Streamline
 
Quote:

Originally Posted by Scott Ritchie
I've been trying to upload our animation to Autodesk Streamline, but it always times out. The file is 118MB, well under the 250MB limit.

Any suggestions?

Oops, posted under Scott's name. :]

Felipe Reis 18-02-2005 22:11

Re: Problems Uploading to Streamline
 
Quote:

Originally Posted by Scott Ritchie
I've been trying to upload our animation to Autodesk Streamline, but it always times out. The file is 118MB, well under the 250MB limit.

Any suggestions?

what about start sending it now?! hauhauua or maybe you could try decrease the number of keyframes of your video or adjust better the codec.....

syntaxers 19-02-2005 22:42

Re: Problems Uploading to Streamline
 
There might be a connection timeout / browser timeout in whatever browser you're using. I uploaded my animation (94 MB) using firefox with no hassles. Or somewhere along the line from your computer to the streamline, there might be some weird router thing that's limiting connection times.

Ryan Dognaux 20-02-2005 01:03

Re: Problems Uploading to Streamline
 
Quote:

Originally Posted by syntaxers
There might be a connection timeout / browser timeout in whatever browser you're using. I uploaded my animation (94 MB) using firefox with no hassles. Or somewhere along the line from your computer to the streamline, there might be some weird router thing that's limiting connection times.

After a few more tries we finally got it to upload and tested it on a few different computers.

I'm feeling good now, because the file became messed up when we uploaded it last year we essentially didn't get to compete too much.

If anyone else is having trouble, just be persistant, there are going to be a lot of people trying to upload in the next few days.

UsmanB 22-02-2005 08:21

Re: Problems Uploading to Streamline
 
how much quality should i set it to if im compressing with cinepak to keep the video under 250 meg?

DinkyDogg 22-02-2005 11:05

Problems uploading to streamline caused us to miss the deadline
 
Twice it got to about 40% before stopping, saying "An error occured while uploading. Please try again." We're trying for the third time at the moment, but we missed the deadline. Will FIRST take mercy on us for being a few minutes behind the deadline?

I sure hope so. The problem occurs both with the streamline application and when using IE as the interface.

DinkyDogg 22-02-2005 11:09

Re: Problems uploading to streamline caused us to miss the deadline
 
When using the streamline client, it says "Unable to transfer document. The size of your site has exceeded its limitl. Upgrade your subscription by contacting us: autodesk.com/streamline... etc"

What's with that? I hope all our efforts on our animation didn't go to waste.

Koko Ed 22-02-2005 11:10

Re: Problems uploading to streamline caused us to miss the deadline
 
Quote:

Originally Posted by DinkyDogg
Twice it got to about 40% before stopping, saying "An error occured while uploading. Please try again." We're trying for the third time at the moment, but we missed the deadline. Will FIRST take mercy on us for being a few minutes behind the deadline?

I sure hope so. The problem occurs both with the streamline application and when using IE as the interface.

I'm dying here because rendering the last scene in my animation took an unexpected 4 hours :mad: :mad: :mad: :mad: :mad: !!!!! And it didn't even render it right! ARGHHH!
Now I'm missing the deadline trying to rush the animation to a finished product.

stevek 22-02-2005 11:26

Re: Problems Uploading to Streamline
 
First I couldn't connect for several hours, then I got an ACOUNT EXCEEDS LIMIT ERROR

Koko Ed 22-02-2005 12:03

Re: Problems uploading to streamline caused us to miss the deadline
 
ANd now I'm being told that its going to take an hour to upload my animation after I had to render it over twice because it was too big.
whatever.

stevek 22-02-2005 12:10

Re: Problems uploading to streamline caused us to miss the deadline
 
Try uploading again, I got the same errors after several hours of trying to connect (ontime) and then when I got to the site- Wham- No drive Space!

Well, its uploading now so Try again.

You to Koko

stevek 22-02-2005 12:13

Re: Problems Uploading to Streamline
 
Try again if you need to, looks like they fixed it.

Koko Ed 22-02-2005 12:16

Re: Problems Uploading to Streamline
 
Quote:

Originally Posted by stevek
Try again if you need to, looks like they fixed it.

I'm so late I'm putting the animation in whether or not it gets judged!
We worked too hard on this to just walk away!

pmax 22-02-2005 12:43

Re: Problems Uploading to Streamline
 
Teams,
We have cleared up a disk space issue, and uploading should
run smoothly now.

If you have any issues, please contact Autodesk support.

Regards,
Peter Maxfield
Autodesk
FIRST Pacific NW Volunteer Coordinator


All times are GMT -5. The time now is 13:30.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi