Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   pic: Team 33 - Buzz 10 (http://www.chiefdelphi.com/forums/showthread.php?t=35359)

Jim Zondag 23-02-2005 18:51

pic: Team 33 - Buzz 10
 

pakrat 23-02-2005 18:54

Re: pic: Team 33 - Buzz 10
 
Its very nice looking. How many can Buzz hold before they fall out?

Eric Yahrmatter 23-02-2005 18:56

Re: pic: Team 33 - Buzz 10
 
Quote:

Originally Posted by pakrat
Its very nice looking. How many can Buzz hold before they fall out?

The most we've tried is four in the holder and one in the claw, and they seem to stay in pretty well.

pakrat 23-02-2005 18:59

Re: pic: Team 33 - Buzz 10
 
That's a pretty good number, and so far the best tetra holder i've seen.

Paul H 23-02-2005 19:08

Re: pic: Team 33 - Buzz 10
 
Wait until you see it drive....you might say it's not your average Killer Bees drivetrain ;)

Ryan Dognaux 23-02-2005 19:10

Re: pic: Team 33 - Buzz 10
 
Quote:

Originally Posted by Paul H
Wait until you see it drive....you might say it's not your average Killer Bees drivetrain ;)

Woah, is that a roller of some kind I see on the side there?

Can't wait to see it in action, you guys always have great bots.

Eric Yahrmatter 23-02-2005 19:27

Re: pic: Team 33 - Buzz 10
 
Quote:

Originally Posted by Ryan Dognaux
Woah, is that a roller of some kind I see on the side there?

Can't wait to see it in action, you guys always have great bots.


Thanks, and yes it is a roller.

Pi Is Exactly 3 23-02-2005 19:33

Re: pic: Team 33 - Buzz 10
 
What's the roller made out of?

Eric Yahrmatter 23-02-2005 19:39

Re: pic: Team 33 - Buzz 10
 
Quote:

Originally Posted by Pi Is Exactly 3
What's the roller made out of?


A solid aluminum rod with tapped holes at each end.

sanddrag 23-02-2005 19:39

Re: pic: Team 33 - Buzz 10
 
I bet the roller is not part of the drive system but rather an anti-tipping device.

Eric Yahrmatter 23-02-2005 19:43

Re: pic: Team 33 - Buzz 10
 
Quote:

Originally Posted by sanddrag
I bet the roller is not part of the drive system but rather an anti-tipping device.

You guessed right. We also have small wheels on the front and rear that serve the same purpose.

Pi Is Exactly 3 23-02-2005 19:44

Re: pic: Team 33 - Buzz 10
 
Ah ok, that's what I was lookin for. As long as its not a part of the drive train, its ok. Looks great you guys. I love the hive look. Very cool.

pakrat 23-02-2005 19:47

Re: pic: Team 33 - Buzz 10
 
what about the arm? Does it extend, or just have those joints?

Eric Yahrmatter 23-02-2005 19:48

Re: pic: Team 33 - Buzz 10
 
Quote:

Originally Posted by pakrat
what about the arm? Does it extend, or just have those joints?

No, it does not extend. However, it has a maximum height of over 10 feet from the floor.

Paul H 23-02-2005 19:52

Re: pic: Team 33 - Buzz 10
 
The roller is not what I was talking about when I mentioned the drive....guess again!


The arm only articulates at the two joints, and last I heard it's about a 10 foot reach.


...Eric beat me to the arm comment


All times are GMT -5. The time now is 18:51.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi