pic: Tigertrons 222 05 Pic #2
 

Re: pic: Tigertrons 222 05 Pic #2
 

That looks great, are you planing on protecting the bot with lexan or something?
It looks kinda familiar, i guess great minds think alike ;)

Re: pic: Tigertrons 222 05 Pic #2
 

It looks like you are running a turret. If so, how many degrees of rotation do you have? What types of motors are powering it? Speed? If you respond to my questions, it would be great. WildEmerica

Re: pic: Tigertrons 222 05 Pic #2
 

Yes we have Gull Wing doors in between the turret and tetra.

We also have lexan covering other parts, the 1/16'' lexan sides were in production while this picture was being taken.

We have 360 degrees of motion, however, it is not continuous(just like your neck/head motion is limited).

From center 180 degrees counter-clockwise and 180 degrees clockwise.

We used the Nippon Denso motor with an attached sprocket

A picture of it can be seen here:
http://www.chiefdelphi.com/forums/sh...t=window+motor

Around 4 seconds for 180 degrees.

Re: pic: Tigertrons 222 05 Pic #2
 

Great looking bot. We look forward to competing with you guys at Philly. Tigertrons - always a force to be reckoned with.