Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   What's the most innovative/different design you've seen? (http://www.chiefdelphi.com/forums/showthread.php?t=36082)

rangersteve 17-03-2005 22:10

Re: What's the most innovative/different design you've seen?
 
My vote goes to 1024 the killa-bytes

They can effectively use the automated loading zone. The gripper holds sturdy and releases with no problem. they stack 5-6 tetras a match on 5-6 different goals.
They also have a sleek looking robot.

Conor Ryan 17-03-2005 22:19

Re: What's the most innovative/different design you've seen?
 
most innovative feature i've seen all day has to go to 224.

they have 2 casters on a pneumatic cylinder, so that during a match, if they want to they can switch from 4 wheel drive to 2 wheel drive.

I must say its a pretty neat alternative to a 2 or more speed gear box.

as for the 1 joystick driving, 1367 also did it. its pretty neat to watch, but i still like the 2 joystick system.

sanddrag 17-03-2005 22:22

Re: What's the most innovative/different design you've seen?
 
Quote:

Originally Posted by cdr1122334455
most innovative feature i've seen all day has to go to 224.

they have 2 casters on a pneumatic cylinder, so that during a match, if they want to they can switch from 4 wheel drive to 2 wheel drive.

I must say its a pretty neat alternative to a 2 or more speed gear box.

I don't see how that is at all comparable to a shifting transmission.

Anyway, I don't know about innovative or creative but for "just plain crazy" I'd cast a vote for our HexaMax R2 six motor two speed drive system. :)
http://www.chiefdelphi.com/forums/sh...ad.php?t=35266
http://www.chiefdelphi.com/forums/sh...ad.php?t=35272

I can't wait to see it perform.

Kyle Love 17-03-2005 22:23

Re: What's the most innovative/different design you've seen?
 
My vote goes for team 868. They basically have two arms...one holds tetras and sets them on a goal and the other can pick up tetras off the ground and/or hold the tetras on the other arm on. Great design...I think they should do pretty well.

Conor Ryan 17-03-2005 22:26

Re: What's the most innovative/different design you've seen?
 
Quote:

Originally Posted by sanddrag
I don't see how that is at all comparable to a shifting transmission.

it's definetly something you need to see in person, very unique and difficult to explain

JackN 18-03-2005 20:47

Re: What's the most innovative/different design you've seen?
 
I saw 469 at the Detroit regional. They have the best arm i have seen yet. They can cap three at a time and it can go in any direction.

Eric Yahrmatter 18-03-2005 20:50

Re: What's the most innovative/different design you've seen?
 
Quote:

Originally Posted by JohnnyB
My vote goes to Killer Bees... looks likea very unique storage system and I cant wait to see how well its implemented.

Sorry, it doesn't do that anymore. We have a pitchfork instead.

Alex357 19-03-2005 19:50

Re: What's the most innovative/different design you've seen?
 
The best tetra grabber that i've seen would have to be team 188.


It's a little biased, but team 357's drive train.
So far it hasn't been explained too well, so here ya go...

The drive train is a mecanum wheel hybrid completely manufactured by our team. The rollers are configured on 45 degree angles on our custom hubs. In order for the wheels to achieve their designed motion, each roller's bearings are actually molded into their urethane rubber material. The angles make an "X" pattern.

\\\ ///

/// \\\

Forward motion is achieved by driving all four wheels forward, the same concept applies for backward. Though there is a specific way to do it with these wheels, spinning can also be done in the traditional tank steering manner.

The translational movements are achieved on a screw principle. Diagonal wheels move in the same direction while the other diagonals move in the opposite. For example, the front right and back left move forward, while the others move backward. The roller configuration causes the robot to "slide" left and right.

These wheels can also achieve omni-directional movement: for example, spinning about its own axis while driving in an arc.

The mecanum wheel's rollers prevent the robot from being pushed freely like traditional onmi-wheels.

Videos and other info can be found here: http://www.chiefdelphi.com/forums/sh...ad.php?t=36079

sforsancho 19-03-2005 20:34

Re: What's the most innovative/different design you've seen?
 
Quote:

Originally Posted by Alex357
The mecanum wheel's rollers prevent the robot from being pushed freely like traditional onmi-wheels.

Would you like to back that statement up? I think of the many teams that have done a traditional omni-wheel setup, my team included, can contest that it does not move freely, if implemented correctly . I've seen many teams use them as free spinning casters, and that is not a 'omni drive' system. The fact that the wheels have rollers on them is countered by the wheels being placed at an angle 45 degrees with the chassis.

Alex357 19-03-2005 21:03

Re: What's the most innovative/different design you've seen?
 
Quote:

Originally Posted by sforsancho
Would you like to back that statement up? I think of the many teams that have done a traditional omni-wheel setup, my team included, can contest that it does not move freely, if implemented correctly . I've seen many teams use them as free spinning casters, and that is not a 'omni drive' system. The fact that the wheels have rollers on them is countered by the wheels being placed at an angle 45 degrees with the chassis.

That statement was not meant to discredit the use of the traditional omni-wheel. I was just pointing out that the wheel design itself allows for traction as opposed to the free-spinning rollers on the traditional design.

george56 19-03-2005 21:28

Re: What's the most innovative/different design you've seen?
 
the best arm that i saw at Chesapeake had to be Team 173's arm. it was so simple and effective.

this may sound biased, but I'd have to say the coolest drive train at Chesapeake was ours(team 116). its just sooo cool!

Robomaniac928 04-05-2005 19:18

Re: What's the most innovative/different design you've seen?
 
WOW



the coolest drive train thati have seen would definetly have to go to team jester there bot has custom designed wheels and floats butter fly and stings like a bee

katiyeh07 04-05-2005 19:40

Re: What's the most innovative/different design you've seen?
 
I was definately impressed by the B.O.B robot, and Team 180's robot. They were very different and unique.

Billfred 04-05-2005 20:31

Re: What's the most innovative/different design you've seen?
 
Well, at the risk of tooting my team's horn, our 2004 robot had a bit of an interesting twist.

On the other hand, 67 this year probably took the prize (along with all of the other prizes, for that matter--congrats again, guys :) ). I don't think I've seen a flopping swerve with the ever-popular pitchfork.

Then again, 85 and 180 also have the oddball manipulators that worked well (but more traditional drivetrains). It's all good.

Justin_302 04-05-2005 20:48

Re: What's the most innovative/different design you've seen?
 
....302 had an amazing drivetrain. No one could push them:cool:


All times are GMT -5. The time now is 07:06.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi