Chief Delphi - where do tyou buy the battery connector and circuit breaker

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - where do tyou buy the battery connector and circuit breaker (http://www.chiefdelphi.com/forums/showthread.php?t=39204)

Ken Streeter

14-06-2006 16:15

Re: where do tyou buy the battery connector and circuit breaker

Quote:

Originally Posted by sparksandtabs

i was wondering where you buy the connectors for the batteries and the circuit breakers because they are going to be for my personal robot that i have built and now improving along, and they are the only one i have seen that work so well

For the red Anderson SB50 Connectors, we've had good success with "Helmar Parts," who sells these connectors for about half the price of any of the typical robotics suppliers: http://www.helmarparts.com/product_p/6331g1.htm

Who would have thought that lift trucks would use these connectors?

Mike AA

14-06-2006 18:43

Re: where do tyou buy the battery connector and circuit breaker

Also, check your local electronics suppliers and places like Granger. I get ours from Granger right when I walk in the door and don't have to wait to order them. To me, if I want it I want it now.... usually.

I use the large connectors, the 350A for in my car. I keep a 2500 Watt inverter with a connector, the secondary battery with a connector in my trunk and a set of jumper cables with a connector. I can start a semi with a minor switch of a wire. I also have it so another car can use the inverter just by using the jumper cables and inverter.

Just make sure you crimp, and as most do, solder the connector on.

-Mike

All times are GMT -5. The time now is 07:04.

Page 2 of 2

Show 100 post(s) from this thread on one page