Chief Delphi - [OCCRA]: Motor shaft modification

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- OCCRA Q&A (http://www.chiefdelphi.com/forums/forumdisplay.php?f=140)

- - [OCCRA]: Motor shaft modification (http://www.chiefdelphi.com/forums/showthread.php?t=39982)

Alex Golec

11-10-2005 19:41

[OCCRA]: Motor shaft modification

Can the shaft of the keyang integrated motor be drilled with a small diameter hole to allow a shaft to be pinned directly to it?

Mike Martus

12-10-2005 21:39

Re: [OCCRA]: Motor shaft modification

Quote:

Originally Posted by Alex469

Can the shaft of the keyang integrated motor be drilled with a small diameter hole to allow a shaft to be pinned directly to it?

Official answer:
In the past we have allowed the shafts to be coupled and cut if needed. Drilling is also acceptable.

Reminder if you damage it beyond use you will need to purchase a new one.

We have a limited supply.

All times are GMT -5. The time now is 04:26.