Chief Delphi
Page 4 of 5 < 123 4 5 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Inventor (http://www.chiefdelphi.com/forums/forumdisplay.php?f=57)
-   -   Model "Wish" list (http://www.chiefdelphi.com/forums/showthread.php?t=40663)

Daniel Brim 18-01-2006 20:59
Re: Model "Wish" list
 
Quote:
Originally Posted by Conor Ryan
First off, 1403 <3's FIRSTcadlibrary Thank You!

Also for the CMUcam, the Pan/Tilt Assembly, would that be possible?

Other random ideas off my head, I don't expect any of this to be done, but since your open to ideas...
  • 2006 RC
  • Light box Assembly
  • Mabuchi Motor
  • Left and Right hand versions of the Nippon-Denso Window motors
  • Poof Ball (with any available material data, such as approx weight and density, please)
  • Joystick? There are some operator interfaces up there, so why not the kit joysticks? the old neutral handed joysticks would be popular too
  • speaking of operator interfaces...2006 Operator
  • Andymark Battery Pins?
  • If you guys get really bored-Google Camera
This isn't really an Inventor issue, but more of a management issue, would it be possible if there could be a big .zip file with a "Virtual Kit"

keep up the awesome work!
Pan-tilt is on FirstCadLibrary right now (next to the CMU camera on the electrical page).

Ed Sparks 19-01-2006 08:16
Re: Model "Wish" list
 
Quote:
Originally Posted by Conor Ryan
First off, 1403 <3's FIRSTcadlibrary Thank You!

Also for the CMUcam, the Pan/Tilt Assembly, would that be possible?

Other random ideas off my head, I don't expect any of this to be done, but since your open to ideas...
  • 2006 RC
  • Light box Assembly
  • Mabuchi Motor
  • Left and Right hand versions of the Nippon-Denso Window motors
  • Poof Ball (with any available material data, such as approx weight and density, please)
  • Joystick? There are some operator interfaces up there, so why not the kit joysticks? the old neutral handed joysticks would be popular too
  • speaking of operator interfaces...2006 Operator
  • Andymark Battery Pins?
  • If you guys get really bored-Google Camera
This isn't really an Inventor issue, but more of a management issue, would it be possible if there could be a big .zip file with a "Virtual Kit"

keep up the awesome work!
The 2006 RC & 2006 OI are exactly the same as the 2005 versions (graphically of course) so I do not plan on posting another version. I plan on posting the Nippon-Denso motors and the Mabuchi motor right after I finish the FIRST Transmission Detail and Dewalt Transmission.

I'm not sure that providing a "big .zip" file makes sense for the FCL because individual models are modified and added on a somewhat regular basis during the season. If everyone downloaded the "big .zip" on a regular basis I would go broke paying my IP for bandwidth. Maybe one of these days I'll make the big time and get a sponsor (or win the lottery). For now, we'll have to live within my budget constraints.

Amittt 19-01-2006 09:57
Re: Model "Wish" list
 
Ok, look, I really need this picture to become a model, I found this jpg at google pictures.
Please help me, thanks.
Here is the jpg: http://www.roboraiders.com/inventor/large/process1.jpg

Ed Sparks 19-01-2006 11:48
Re: Model "Wish" list
 
Quote:
Originally Posted by Amittt
Ok, look, I really need this picture to become a model, I found this jpg at google pictures.
Please help me, thanks.
Here is the jpg: http://www.roboraiders.com/inventor/large/process1.jpg

All of the parts to build this model are available. The frame is located here and the motors & wheels are here .

Amittt 19-01-2006 13:58
Re: Model "Wish" list
 
Ok, I have lot of difficulties with building only this base of the robot, and it's the same base in most teams, so if you can please leave the already built base here it would be very helful.
Thanks alot.

Andy A. 19-01-2006 16:25
Re: Model "Wish" list
 
A "BaneBot's" transmission?

Right now I have a block that follows the basic dimensions and mounting holes, but it lacks that level of detail we've all come to love. I doubt that they will be as popular as the dewalts, but there is a buzz about them.

-Andy A.

SpaceOsc 19-01-2006 16:55
Re: Model "Wish" list
 
I love the FCL, just hope they update the victors to the new 884 victors

Ed Sparks 20-01-2006 07:33
Re: Model "Wish" list
 
Quote:
Originally Posted by SpaceOsc
I love the FCL, just hope they update the victors to the new 884 victors

#4 on my list of things to do ......

Ed Sparks 20-01-2006 07:34
Re: Model "Wish" list
 
Quote:
Originally Posted by Andy A.
A "BaneBot's" transmission?

Right now I have a block that follows the basic dimensions and mounting holes, but it lacks that level of detail we've all come to love. I doubt that they will be as popular as the dewalts, but there is a buzz about them.

-Andy A.

I'd like to, but I don't have one yet. Any sponsors out there ? ;)

Amittt 31-01-2006 05:51
Re: Model "Wish" list
 
Hello, I have another request. I need a model of the arena (playing field) for inventor / pro desktop.
If you can help, thanks.

JagWire 14-02-2006 20:42
Re: Model "Wish" list
 
Quote:
Originally Posted by Ed Sparks
The 2006 RC & 2006 OI are exactly the same as the 2005 versions (graphically of course) so I do not plan on posting another version. I plan on posting the Nippon-Denso motors and the Mabuchi motor right after I finish the FIRST Transmission Detail and Dewalt Transmission.

I'm not sure that providing a "big .zip" file makes sense for the FCL because individual models are modified and added on a somewhat regular basis during the season. If everyone downloaded the "big .zip" on a regular basis I would go broke paying my IP for bandwidth. Maybe one of these days I'll make the big time and get a sponsor (or win the lottery). For now, we'll have to live within my budget constraints.
As for the DeWalt Transmission, I have an extremely rough Inventor 10 version with the mounts and CIM motor attached. It's just the outer shell for the most part, but if anyone would like it, you can download it from my team's website. www.team1742.com just go to the downloads page. If you need a different file type, step or iges or something, just email me and I'll see what I can do. :)

Daniel Brim 20-02-2006 20:17
Re: Model "Wish" list
 
Ed, just an item of note (just a slight problem :) )

The holes on the CMU-Camera and the CMU Pan-Tilt do not line up.

Otherwise, they're both awesome! :)

vVigglEs 21-02-2006 10:11
Re: Model "Wish" list
 
some electrical connections + working chain

Ed Sparks 21-02-2006 15:49
Re: Model "Wish" list
 
Quote:
Originally Posted by DanielBCR
Ed, just an item of note (just a slight problem :) )

The holes on the CMU-Camera and the CMU Pan-Tilt do not line up.

Otherwise, they're both awesome! :)

Thanks! I'll fix it and post a notice. :)

Ed Sparks 21-02-2006 15:52
Re: Model "Wish" list
 
Quote:
Originally Posted by vVigglEs
some electrical connections + working chain
Any specific type (or part number) of electrical connections?


All times are GMT -5. The time now is 03:54.
Page 4 of 5 < 123 4 5 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi