Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   FIRST Tech Challenge (http://www.chiefdelphi.com/forums/forumdisplay.php?f=146)
-   -   Vex Lab pieces (http://www.chiefdelphi.com/forums/showthread.php?t=40951)

gdo 19-12-2005 18:44

Vex Lab pieces
 
Now these being competition legal (except the pneumatics) what does everyone think of them, and what pieces have gotten your attention the most

Personally I love alot of the new pieces, I love the C-channel as being in the competition last year it is a huge impovement over the L-pieces from last year. I also like the sliding pieces, the only thing I dislike is the fact that they are a bit heavy.

Vex Labs has a very useful table that I hope may help some people : http://www.vexlabs.com/forum/viewtopic.php?t=152

I found it helpful to build a good robot

best of luck to everyone this year

Francis-134 19-12-2005 18:59

Re: Vex Lab pieces
 
The new pieces look EXTREMEMLY helpful. I'm sure all everyone has always said, "man, I could build a sweet robot only if I had one of these". As for that chart, I totally want to do a 84 to 12 tooth gear ratio now that it says that its dangerous :p. Seriously though, a little Vex bot with a spinning rotor of doom going 15 ft/s :eek:

gdo 19-12-2005 21:02

Re: Vex Lab pieces
 
but at that gearing the torque of the motor would be almost nothing, meaning that it would stop on contact of another object


All times are GMT -5. The time now is 17:45.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi