Chief Delphi - Linkage bars

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Linkage bars (http://www.chiefdelphi.com/forums/showthread.php?t=41033)

John Gutmann

25-12-2005 23:50

Linkage bars

1 Attachment(s)

does anyone kno where to get the linkage bars like the ones in the attached picture?

sanddrag

25-12-2005 23:56

Re: Linkage bars

I assume you are talking about the ones with black ends. Those would be RC car rod ends and turnbuckles. Your local hobby shop that stocks RC products is the best bet. If you want to order online, search www.towerhobbies.com for "rod end" and for "turnbuckle". There are also some nice ones here http://rc4wd.com/shop/index.php?cPat...8385 d820a819

You can also check www.mcmaster.com for "rod end" if you need bigger ones.

Let me know if you have any more questions. :)

greencactus3

26-12-2005 00:25

Re: Linkage bars

definitly hobbyshop. and i dunno how much tensionis going into them but fairly strong paperclips work for emergencies.. and well. the thicker heavy duty paper clips i guess they are called. the ones with a black clip and two "foldable" "handles" on them... those handles are quite strong. a needlenose and a vise will be all you need.

John Gutmann

26-12-2005 09:44

Re: Linkage bars

I knew they used them for the steering linkages on TMAXX and all those cars but I didnt know if I should use the same ones or if there was a different kind for non-rc things.

All times are GMT -5. The time now is 21:30.