Chief Delphi - 6 CIM Motors?

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Kit & Additional Hardware (http://www.chiefdelphi.com/forums/forumdisplay.php?f=55)

- - 6 CIM Motors? (http://www.chiefdelphi.com/forums/showthread.php?t=41268)

greencactus3

08-01-2006 23:10

Re: 6 CIM Motors?

Quote:

Originally Posted by Andrew Blair

Yes, but you could replicate this effect by running the standard 4 CIMs, and two FPs at once. It could happen. And you can draw over 200 amps through the battery for a short period of time. I don't know how much over 200, but anyway, the 120 amp would break relatively quickly in said case.

But who the heck is going to run 6 CIMs at that current at the same time anyway? Please, no "HexaMax V2"...

we'll be rolling on 22"s yo :p

btw i havent found them yuet but the freespeed rpms for both small and large cims are close?

Andy Baker

09-01-2006 08:47

Re: 6 CIM Motors?

Quote:

Originally Posted by greencactus3

we'll be rolling on 22"s yo :p

btw i havent found them yuet but the freespeed rpms for both small and large cims are close?

Here are approximate free speeds:

CIM Motor: 5,310 rpm
CIM Motor Specs

Mini-Bike Motor: 2,500 rpm
Mini-Bike Motor curve

However... keep in mind that these motors may run faster or slower. I've seen this Mini-Bike Motor run over 2,700 rpms and the CIM motor run 5,500 rpms. Consider them to be +/- 10% of the rated speeds.

Andy Baker

All times are GMT -5. The time now is 16:08.

Page 2 of 2

Show 100 post(s) from this thread on one page