Chief Delphi - <R86> No more than one motor may be connected to each speed controller.

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - <R86> No more than one motor may be connected to each speed controller. (http://www.chiefdelphi.com/forums/showthread.php?t=41312)

Michael Hill

08-01-2006 01:56

<R86> No more than one motor may be connected to each speed controller.

So are we not allowed to use 2 motors to drive each side of our robot this year? I know in past years, we have used a CIM motor and a FP motor w/ planetary gearbox. But it says we can only use one motor. Will this rule have to be revised?

Hutch

08-01-2006 01:58

Re: <R86> No more than one motor may be connected to each speed controller.

No, it just says you can't attach two motors to the victor - you just need to send the same PWM to two different victors so you can have the two motors on the side (this has always been the case).

Michael Hill

08-01-2006 02:00

Re: <R86> No more than one motor may be connected to each speed controller.

Duh...I'm stupid. I remember this being the case clearly now. Thanks for the kick in the pants. :D

All times are GMT -5. The time now is 10:10.