Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)
-   -   Moved: EASY C (http://www.chiefdelphi.com/forums/showthread.php?t=41483)

JamesByrne 10-01-2006 14:52

EASY C
 
Did any one get product keys with this, it was going to come with 3 of them, but it is not on the list of parts and we did not get any of them.

Tahnks, any help apreciated.

dlavery 10-01-2006 15:14

Re: EASY C
 
The easyC product keys are e-mailed to the primary contact for your team. Most, if not all, of them have been sent out by now. Check with the primary contact for your team (as identified in the TIMS system) - they should have what you need.

-dave

Kingofl337 10-01-2006 15:20

Re: EASY C
 
If they did not receive the code please have that person contact us at: FRCRegistration@intelitek.com

Bharat Nain 10-01-2006 15:20

Re: EASY C
 
The main contact of your team should have received an email with the product key for one user. At least ours did. You can download the trial software from their website.

RoboMom 10-01-2006 15:21

Re: EASY C
 
And keep in mind that this is for one computer per team.

Kingofl337 10-01-2006 16:19

Re: EASY C
 
Quote:

Originally Posted by RoboMom
And keep in mind that this is for one computer per team.

Additional Seats are Available for a very low cost and in different sizes to fit
every teams budget.

ldeffenb 10-01-2006 17:04

Re: EASY C
 
Quote:

Originally Posted by Kingofl337
Additional Seats are Available for a very low cost and in different sizes to fit
every teams budget..

"Low" depends on your altitude and attitude. Our team is very cash-strapped, so we'll be holding ourselves to the single license and attempt to share the "seat" (my laptop). I suspect that chaos could soon ensue if you tried to get too many hands into the (inherently non-sharable) visual development pot.

Just my $0.02 for whatever you think it is worth.

Lynn (D) - Team Voltage Software Mentor

PS. But, then again, I still write C in an editor and compile from makefiles in a command prompt!

Miroslav 10-01-2006 19:36

Re: EASY C
 
Quote:

Originally Posted by ldeffenb
"Low" depends on your altitude and attitude. Our team is very cash-strapped, so we'll be holding ourselves to the single license and attempt to share the "seat" (my laptop). I suspect that chaos could soon ensue if you tried to get too many hands into the (inherently non-sharable) visual development pot.

CoreChartFR is sponsored free to every student and mentor ( and sponsor ) in FIRST Robotics 2006. It is not limited to one seat. The sponsored unlock key and instruction document can be emailed to you if you send a request to me: miro@elabtronics.com

JamesByrne 10-01-2006 22:58

Re: Moved: EASY C
 
thanks for the help.


All times are GMT -5. The time now is 04:31.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi