Chief Delphi - Has Anybody played with the Camera?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Has Anybody played with the Camera? (http://www.chiefdelphi.com/forums/showthread.php?t=41518)

Re: Has Anybody played with the Camera?

We got our camera working tonight. We got the camera to drive its own servos and track the target!

Re: Has Anybody played with the Camera?

Quote:

Originally Posted by naor52

wich software every body track after the green light with the MPLAB or in the CMUcam2GUI software?

hey naor, ma kore achi?

We're using mplab to track, but first we used the CMUcam2GUI to focus the camera.

If you need any more help, ani medaber ivrit, PM me your ICQ or messenger, and ill help with whatever I can.

mekave she'ani yochal la'azor lecha,

Re: Has Anybody played with the Camera?

Quote:

Originally Posted by CarpeDiem

from the manual i have tried to hook up the camera to the rc and nothing happens can anyone tell me what i am doing wrong, and where does the pwm cable hook into the cmucam from the ttl board on the rc?

What do you have hooked up? Do you have the two servos hooked up to the correct pwms, and is the jumper connected for external power to the servos?

Do you have a pwm cable connected between an unused pwm output and the power connecter on the camera (the 3 pin female connecter located below the camera lens)?

The ttl-rs232 connector goes from the three pin female connecter near the serial port on the camera board to the 4 pin ttl connecter on the RC (located near the program button.

Hope this helps,