Chief Delphi - Interupts?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Interupts? (http://www.chiefdelphi.com/forums/showthread.php?t=41554)

I was told that there was a really good paper in interupts. Could anyone point me to that?

Also, any docu about how to use/write to EEPROM would be much appriciated!

Ultamently i want to create a command line interface for my robot. This will be complete with the ability to tweak settings and perhaps script autonomous code on the fly. A status screen would also be very nice but for that i would need to understand how VT100 works.

Quote:

Originally Posted by Validius

Also, any docu about how to use/write to EEPROM would be much appriciated!

I have EEPROM code that works with the robot controllers. A version that will work with the 2004/2005 controllers can be found here: http://kevin.org/frc/2005/. I'll release a version for the 2006 controller soon (It's done, but I want to do some testing).

Quote:

Originally Posted by Validius

Ultamently i want to create a command line interface for my robot. This will be complete with the ability to tweak settings and perhaps script autonomous code on the fly.

Well, the new camera menuing code should give you some ideas.

Quote:

Originally Posted by Validius

A status screen would also be very nice but for that i would need to understand how VT100 works.

From camera_readme.txt:

Code:

Since the IFI terminal is somewhat restrictive, you might

consider using one of the free high quality terminal emulators

available. TeraTerm Pro (http://www.ayera.com/teraterm) and

PuTTY (http://www.chiark.greenend.org.uk/~sgtatham/putty) are

a few examples. If you dive into the existing code or create 

your own custom menus (as I hope you will), you might consider

writing code that will exploit the capabilities of a good

terminal emulator. To get started, do a google search on the

phrase "terminal escape codes".

-Kevin

Yes, teraterm is a must. The IFI terminal is kinda lame.

Kevin: Have you written any docu on interupts?

Quote:

Originally Posted by Validius

I was told that there was a really good paper in interupts. Could anyone point me to that?

Maybe you're referring to this one, Interrupts for Dummies.

Quote:

Originally Posted by Validius

Yes, teraterm is a must. The IFI terminal is kinda lame.

Kevin: Have you written any docu on interupts?

No, but Dan Katanski did some time back. Here's a link: http://www.chiefdelphi.com/forums/pa...le&paperid=272.

You'll find my interrupt template code for the 2004/2005 controller here: http://kevin.org/frc/2005. It should work just fine with the 2006 controller, but I haven't tried compiling interrupts.c/.h for the new controller so your mileage may vary.

-Kevin

Thanks, all that looks great!