Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   CMUcam2 disclaimer (http://www.chiefdelphi.com/forums/showthread.php?t=41645)

Cody Carey 11-01-2006 21:47

CMUcam2 disclaimer
 
Disclaimer
No warranties, either expressed or implied, are made regarding the operation, use or results of this

hardware. This product is meant for educational purposes only. Any resemblance to real persons,

living or dead is purely coincidental. CMUcam2 void where prohibited with some assembly

required. Batteries and servos not included. Contents may settle during shipment so only use as

directed. No other warranty expressed or implied. Do not use while operating a motor vehicle or

heavy equipment. Apply CMUcam2 only to affected area. If condition persists, consult your

physician. May be too intense for some viewers and for recreational use only. Do not disturb

CMUcam2 during boot process. All models over eighteen years of age. No user-serviceable parts

inside. Freshest if used before date on carton. Subject to change without notice. Many CMUcam2

times approximate and many pictures simulated. Breaking seal constitutes acceptance of

agreement. This product is known to the state of California to cause birth defects. As seen on TV

one size fits all. My man the yellow darts comments not actually generated by the yellow dart.

Contains a substantial amount of non-tobacco ingredients. Colors may, in time, fade. Slippery when

wet. If CMUcam2 acts up; keep cool; process promptly. Not responsible for direct, indirect,

incidental or consequential damages resulting from any defect, error or failure to perform.

Substantial penalty for early withdrawal. Keep away from fire or flame. Replace with same type.

Some of the trademarks mentioned in this product appear for identification purposes only. No

animals were hurt in the production of this device. This supersedes all previous notices.



wow... I like it :)

Gdeaver 11-01-2006 22:25

Re: CMUcam2 disclaimer
 
May I suggest a career in corporate law?

Mike 11-01-2006 22:27

Re: CMUcam2 disclaimer
 
Quote:

Originally Posted by Cody C
Disclaimer
No warranties, either expressed or implied, are made regarding the operation, use or results of this

hardware. This product is meant for educational purposes only. Any resemblance to real persons,

living or dead is purely coincidental. CMUcam2 void where prohibited with some assembly

required. Batteries and servos not included. Contents may settle during shipment so only use as

directed. No other warranty expressed or implied. Do not use while operating a motor vehicle or

heavy equipment. Apply CMUcam2 only to affected area. If condition persists, consult your

physician. May be too intense for some viewers and for recreational use only. Do not disturb

CMUcam2 during boot process. All models over eighteen years of age. No user-serviceable parts

inside. Freshest if used before date on carton. Subject to change without notice. Many CMUcam2

times approximate and many pictures simulated. Breaking seal constitutes acceptance of

agreement. This product is known to the state of California to cause birth defects. As seen on TV

one size fits all. My man the yellow darts comments not actually generated by the yellow dart.

Contains a substantial amount of non-tobacco ingredients. Colors may, in time, fade. Slippery when

wet. If CMUcam2 acts up; keep cool; process promptly. Not responsible for direct, indirect,

incidental or consequential damages resulting from any defect, error or failure to perform.

Substantial penalty for early withdrawal. Keep away from fire or flame. Replace with same type.

Some of the trademarks mentioned in this product appear for identification purposes only. No

animals were hurt in the production of this device. This supersedes all previous notices.



wow... I like it :)

http://www.chiefdelphi.com/forums/sh...cam+disclaimer

Cody Carey 11-01-2006 22:29

Re: CMUcam2 disclaimer
 
Sorry, My bad.

Rickertsen2 12-01-2006 01:19

Re: CMUcam2 disclaimer
 
I posted a thread about it last year. I guess somebody reads those things after all


All times are GMT -5. The time now is 15:40.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi