Chief Delphi - MAX software not working

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- LabView and Data Acquisition (http://www.chiefdelphi.com/forums/forumdisplay.php?f=150)

- - MAX software not working (http://www.chiefdelphi.com/forums/showthread.php?t=41903)

fuse	15-01-2006 09:48

MAX software not working

I have installed the LabVIEW software and drivers and also have CMUcam2. When i open Measurement and Automation Explorer, the only options in the tree are "My System" and "Remote Systems". Under My System i click on the devices and interfaces category but there are no COM ports or anything. I have reinstalled everything 3 times and yes i have my serial-USB adapter plugged in while opening it. Everything works fine on a teammates computer. Please help!

Joe Hershberger

15-01-2006 13:09

Re: MAX software not working

Quote:

Originally Posted by pyro17

Sounds like you haven't installed NI VISA. Install the latest version, reboot, and try MAX again. Your serial ports will then show up and your CMUcam2 will work in LabView.

Good Luck!
-Joe

fuse	15-01-2006 23:44

Re: MAX software not working

Quote:

Originally Posted by Joe Hershberger

Sounds like you haven't installed NI VISA. Install the latest version, reboot, and try MAX again. Your serial ports will then show up and your CMUcam2 will work in LabView.

Good Luck!
-Joe

Wow thank you. Isnt it a bit odd that when a teammate followed the exact same steps i did, it worked for him but not me... oh well. Problem solved.

All times are GMT -5. The time now is 00:17.