Chief Delphi - Timing Belt and Pulley

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Timing Belt and Pulley (http://www.chiefdelphi.com/forums/showthread.php?t=41969)

Joe_Widen

16-01-2006 13:03

Timing Belt and Pulley

Did anyone find a place to purchase the timing belts and pulleys that would be used by the large CIMS? We are looking for 3 mm pitch, 15 mm wide belts and pulleys. Thanks in advance.

Greg Perkins

16-01-2006 13:07

Re: Timing Belt and Pulley

www.sdp-si.com they have CAD Models and you can order from them once you find what you want, its a great tool

Joe_Widen

16-01-2006 13:11

Re: Timing Belt and Pulley

Could we have a direct link to that, because we can't find them on that site. Also, do you know the pitch length and number of grooves?

bjimster1

16-01-2006 13:13

Re: Timing Belt and Pulley

its all in this thread:
http://www.chiefdelphi.com/forums/sh...ad.php?t=41360

i havent been able to find the belts or pulleys 3mm pitch & 15mm width, but i have found 3mm pitch and 9mm width. we'll probably settle for that.

belts: www.gates.com
pulleys: http://www.sdp-si.com/salesrep_usa.htm

Michael Borelli

16-01-2006 13:41

Re: Timing Belt and Pulley

Quote:

Originally Posted by Joe_Widen

Did anyone find a place to purchase the timing belts and pulleys that would be used by the large CIMS? We are looking for 3 mm pitch, 15 mm wide belts and pulleys. Thanks in advance.

Try misumiamerica.com, they carry 10mm wide high torque synchronous belts.

All times are GMT -5. The time now is 11:49.