The Annual Drives Platform Poll
 

What Drives platform will your robot have this year?

If Other, please post here.

Re: The Annual Drives Platform Poll
 

We are using a four wheel drive with two onmi wheels in the front and 4 traction wheels in the back. Everything is being driven with 4 small cimms on 2 two-speed transmissions.

Re: The Annual Drives Platform Poll
 

what's the Kiwi Drive?

Re: The Annual Drives Platform Poll
 

Re: The Annual Drives Platform Poll
 

Ahh so omni holonomic in 3 positions

Re: The Annual Drives Platform Poll
 

Basically, yes. The omni-wheels are mounted at 120° angles ot the center of the robot. BTW, if you would like to see a video of one of these in action, here is a video of a kiwi drive robot from Team 857 in 2002.

http://stuweb.ee.mtu.edu/~alkrajew/FIRST/kiwi.mpg

Re: The Annual Drives Platform Poll
 

So what's up with 10WD+?

I think we'll end up with 12 wheels, but only 6 will be powered.

Re: The Annual Drives Platform Poll
 

looks similar to the robot that i posted a picture of, which was taken off of team229.org

Re: The Annual Drives Platform Poll
 

Meh who needs wheels, we are using legs. :D :D No not really, we will most likely use a 6wd system.

Re: The Annual Drives Platform Poll
 

Very interesting, 2 say 10WD+, and one says Crab! i can't wait to see all these diffrent designs for this years game.

Re: The Annual Drives Platform Poll
 

6 small wheels (all powered). Skid steering. 4 small CIMs. 2 speed shift on the fly.

Re: The Annual Drives Platform Poll
 

No swerve drive yet? I thought that would be a popular solution this year...

Re: The Annual Drives Platform Poll
 

Someone please describe the difference between Crab and Swerve. And while you're at it, tell us what omni means. I'm lost. I thought Omni, crab, and swerve meant essentially the same thing.

Re: The Annual Drives Platform Poll
 

Crab and Swerve are the same thing, Both have "modules" which turn in relation to another. As omni's do not require the drive to move, just the wheel..

Crab/Swerve:
http://firstrobotics.uwaterloo.ca/re...etrains049.jpg
http://firstrobotics.uwaterloo.ca/re...etrains058.jpg
http://firstrobotics.uwaterloo.ca/re...etrains067.jpg

Omni:
http://firstrobotics.uwaterloo.ca/re...etrains040.jpg
http://firstrobotics.uwaterloo.ca/re...s/wheels07.jpg
http://firstrobotics.uwaterloo.ca/re...s/wheels27.jpg

Just a few examples of each

Re: The Annual Drives Platform Poll
 

essentially crab and swerve are similiar, but few differences. i believe that a swerve drive has one wheel that turns like a turret and having only 3 wheels in total which are all driven. so in crab all four wheels are able to spin like a turret and be driven. in omni the wheels are stationary and turn in similar direction to the way there paermanently mounted too. there are little wheels that make up the circumfrence of the wlarger wheel, say someone is pushing you from the side omni wheels allow the robot pushing you to move you a lot easier.