Chief Delphi - LabVIEW Com Port Error

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- LabView and Data Acquisition (http://www.chiefdelphi.com/forums/forumdisplay.php?f=150)

- - LabVIEW Com Port Error (http://www.chiefdelphi.com/forums/showthread.php?t=42131)

354.FIRST

18-01-2006 14:36

Labview CMU Camera COM Port Help

Labview problem is with the COM port.

CMUcam2 v1.01 c7

Error Code: -1073807202
Error String: Property Node in VISA Configure Serial Port (Instr).vi->CMUcam2.vi->CMUcam2 GUI.vi

We have the camera set up using labview. Everything works fine.
We have a second computer where we are playing with the c code.

Labview works on first computer. Gives the above error on the second computer. First computer is a desktop, second is a laptop with a serial port.

HELP. We have read all the posts and tried what we could. No luck.

Thank you very much for your help

-Team 354

354.FIRST

18-01-2006 14:38

Re: Notes on the camera

Oh ya,
Under the serial port menu in Labview, nothing is showing up. Just "refresh." nothing else and refresh doesn't help.
thanks
-354

354.FIRST

18-01-2006 14:40

Re: Labview CMU Camera COM Port Help

We did read previous posts...
TTL Cable not connected, port baud settings are correct.

Mike	18-01-2006 15:07

Re: Labview CMU Camera COM Port Help

Quote:

Originally Posted by 354.FIRST

Please post this in a new thread. Could a moderator split this?

Otherwise, I had that same problem and found out the serial cable wasn't in all the way.

Joe Hershberger

18-01-2006 18:43

Re: Labview CMU Camera COM Port Help

Quote:

Originally Posted by 354.FIRST

You didn't install VISA on the second computer. Do so and it should work fine.

Good luck!
-Joe

All times are GMT -5. The time now is 00:16.