Chief Delphi - Which do you use a spike or a victor on the Bosch motor?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Which do you use a spike or a victor on the Bosch motor? (http://www.chiefdelphi.com/forums/showthread.php?t=42306)

Leo 1529

20-01-2006 20:14

Which do you use a spike or a victor on the Bosch motor?

I was wondering if you have to use a victor or a spike on the Bosch van door motor??

Please help....

sanddrag

20-01-2006 20:26

Re: Which do you use a spike or a victor on the Bosch motor?

Read <R86>, <R92>, and <R93> in Section 5 of the manual. :)

Joe Ross

20-01-2006 20:29

Re: Which do you use a spike or a victor on the Bosch motor?

<R87> also applies.

Short answer is you may use either per the rules. However, you should consider carefully the stall current of the Van Door motor and the size of the fuse in the spike.

All times are GMT -5. The time now is 18:51.