Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=177)
-   -   Inducing the green Team LED? (http://www.chiefdelphi.com/forums/showthread.php?t=42401)

Eldarion 21-01-2006 22:51

Inducing the green Team LED?
 
Does anyone know of a way to make the RC blink the team color light green?

Just curious about this little "easter egg"... :D

dez250 21-01-2006 23:20

Re: Inducing the green field light?
 
IIRC, If you set the team number to 0 so you are in a constant autonomous state the Team LED will blink Red, Blue, Red, Blue, Green.

Eldarion 21-01-2006 23:41

Re: Inducing the green field light?
 
Quote:

Originally Posted by dez250
IIRC, If you set the team number to 0 so you are in a constant autonomous state the Team LED will blink Red, Blue, Red, Blue, Green.

Cool, thanks! I'll test this sometime soon. :)

KTorak 21-01-2006 23:50

Re: Inducing the green Team LED?
 
I know I saw a picture of a robot that was flashing green during a regional but I unfortunatelt can't find the thread anymore. But there is photographic evidence :)

Greg Marra 21-01-2006 23:51

Re: Inducing the green Team LED?
 
Our LED started to fall off at a couple of regionals, so not all the pins were in contact, and it started flashing Green and Yellow. That was odd. It's possible, but I don't know how to do it on purpose.

Eldarion 22-01-2006 02:06

Re: Inducing the green Team LED?
 
Quote:

Originally Posted by KTorak
I know I saw a picture of a robot that was flashing green during a regional but I unfortunatelt can't find the thread anymore. But there is photographic evidence :)

I know about that thread, that's how I found out about the green light. :)
Unfortunately, that was during a malfunction of the RC, so there's no way to duplicate it through the same method.

Quote:

Originally Posted by Greg Marra
Our LED started to fall off at a couple of regionals, so not all the pins were in contact, and it started flashing Green and Yellow. That was odd. It's possible, but I don't know how to do it on purpose.

Yeah, I wonder if there are actually four LEDs in there (one blue, one red, one green, and one something else, maybe yellow), because there are five wires to the LED module. That should be four colors and a common ground.

Eldarion 22-01-2006 13:39

Re: Inducing the green field light?
 
Quote:

Originally Posted by dez250
IIRC, If you set the team number to 0 so you are in a constant autonomous state the Team LED will blink Red, Blue, Red, Blue, Green.

I finally got around to testing it and all it would do is blink red/blue :confused:

Any ideas?

sgsdragons 30-01-2006 17:48

Re: Inducing the green Team LED?
 
I'm asuming that you are talking about the LED lights that you mounted to your robot on the sides? If you are, all you have to do is change the wiring around where the wires plug into the RC. I messed around witht hat last week and got ours to bcome white, red, green, blue, bluish green, ect. I will post pics later today If I can.

Josh
Team Driver/Designer

Eldarion 30-01-2006 22:10

Re: Inducing the green Team LED?
 
Quote:

Originally Posted by sgsdragons
I'm asuming that you are talking about the LED lights that you mounted to your robot on the sides? If you are, all you have to do is change the wiring around where the wires plug into the RC. I messed around witht hat last week and got ours to bcome white, red, green, blue, bluish green, ect. I will post pics later today If I can.

Josh
Team Driver/Designer

AWESOME! Could you please post which wires you put where?

Of course I don't have the RC readily available anymore. :rolleyes: However, this would make a great practical joke for the other members of the programming team, who think that it can only be red or blue! :)

dez250 30-01-2006 22:13

Re: Inducing the green Team LED?
 
Just a point of warning, please don't not alter the wiring of the led blocks that will be used on your robot in competition this year. They are used for diagnostics and by you changing the wire pattern will result in confused technicians and possible issues on the field.

Bill Moore 31-01-2006 07:31

Re: Inducing the green Team LED?
 
Quote:

Originally Posted by dez250
Just a point of warning, please don't not alter the wiring of the led blocks that will be used on your robot in competition this year. They are used for diagnostics and by you changing the wire pattern will result in confused technicians and possible issues on the field.

Since the LED is supposed to show your alliance color (red or blue), flashing the green periodically during a match to confuse the other robots, would probably be considered ungraciously professional and lead to a DQ. It would be a novel idea as a defensive mechanism and interesting to watch though.

[EDIT] As you can see below, Katie has found the "letter of the law" that addresses this situation.[/EDIT]

sgsdragons 31-01-2006 11:39

Re: Inducing the green Team LED?
 
I realize this, I was using the lights that were on the robot last year. We are using last years robot for testing stuff and I just wanted to mess around with it.

Josh
Team Designer/Driver

Katie Reynolds 31-01-2006 11:40

Re: Inducing the green Team LED?
 
Quote:

Originally Posted by Bill Moore
Since the LED is supposed to show your alliance color (red or blue), flashing the green periodically during a match to confuse the other robots, would probably be considered ungraciously professional and lead to a DQ. It would be a novel idea as a defensive mechanism and interesting to watch though.

<R14> Robots must use the Alliance Color LED provided in the Kit of Parts to display their alliance color (red or blue). The Color LED will be used by field personnel during the matches for diagnostic purposes. It must be mounted on the robot such that their displayed color is easily visible while standing in front of the robot in its’ starting position. Instructions for connecting the Color LEDs are provided in the Innovation First Controller manual. The Robot Controller directly powers and controls the Team Color LEDs. The user has no control over the Team Color LEDs and no programming is required.

<R31> No devices or decorations are permitted on the robot that are intended to jam or interfere with the operation of the vision system (i.e. changing robot color to confuse opponent’s vision system).

JVN 31-01-2006 11:50

Re: Inducing the green Team LED?
 
IIRC - Last year on 229 we plugged in the LED plug sideways on the RC pins. This made it a solid green. The IFI reps at Finger Lakes enjoyed picking on me for that oopsie.


-JV

Eldarion 31-01-2006 13:23

Re: Inducing the green Team LED?
 
Just so everyone knows, I was not going to use this in competition, let alone to jam someone else's vision system in an incredibly un-GP manner! :ahh:

As I stated previously, I just wanted to play a practical joke on the other members of the programming team, as well as unlock this little "easter egg" IFI put in our team color LEDs. :)


All times are GMT -5. The time now is 20:20.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi