Chief Delphi - pic: WildStang 2006 Teaser 1

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: WildStang 2006 Teaser 1 (http://www.chiefdelphi.com/forums/showthread.php?t=42466)

Re: pic: WildStang 2006 Teaser 1

"Bling bling Yo!" That's all I can say. Awesome work.

Ellery

Re: pic: WildStang 2006 Teaser 1

Quote:

Originally Posted by RogerR

i'm gonna say drive wheel, because of the sprocket. i think that unless the connecting sprocket is either very large, or spinning at a very high speed, this sprocket is for gearing down. and it looks a #25 sprocket to me, which would put the wheel dia. around 6".

I'd put money on it being a non drive wheel. That's some very thin sheet metal to start with. I sure wouldn't want to mill out spokes and then put them in my drivetrain where they'll be under a ton of load.