Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Kit & Additional Hardware (http://www.chiefdelphi.com/forums/forumdisplay.php?f=55)
-   -   Vision Target Assembly (http://www.chiefdelphi.com/forums/showthread.php?t=42563)

platt 24-01-2006 16:07

Vision Target Assembly
 
Did anyone build the vision target assembly according to specs, and if so where did you get parts/part #s?

Greg Marra 24-01-2006 16:15

Re: Vision Target Assembly
 
The pieces required to build it are included in this year's kit of parts, in the National Instruments box (if I am not mistaken).

ntroup 24-01-2006 16:24

Re: Vision Target Assembly
 
Quote:

Originally Posted by Greg Marra
The pieces required to build it are included in this year's kit of parts, in the National Instruments box (if I am not mistaken).

The HDPE, and the green Cold Cathode Light kits were supplied, but the housing was not. From the FRC_Vision_Target_Sheets posted on the 2006 FRC Documentation page, it lists the housing as being a Hammond Aluminum Enclosure, 8"x16"x2".

We got two of these from Mouser:
http://www.mouser.com/index.cfm?handler=displayproduct&lstdispproductid= 258397&e_categoryid=69&e_pcodeid=54605

The rest of the smaller items (terminal block,etc), we found equivalent parts in our surplus drawers.

Hope that helps
-Nate

Kirk 24-01-2006 18:14

Re: Vision Target Assembly
 
we used 2x2 wood and made a frame, screwed the HDPE to it and glued the cathode tubes to the HDPE. Simple and cheap.

Kirk

keithv708 26-01-2006 17:34

Re: Vision Target Assembly
 
Quote:

Originally Posted by platt
Did anyone build the vision target assembly according to specs, and if so where did you get parts/part #s?

a shoe box's? :confused:


All times are GMT -5. The time now is 20:27.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi