Robot Controller seemingly stuck
 

My team has recently tried to upload our code onto the RC. The first time we tried, everything went well, and the code was responding. The second time, after some revisions of the code, the RC seemed to freeze. The Programming State LED was stuck yellow, even after we redownloaded the code. I searched CD and found that this problem occurred to other teams. When we followed FIRST's instructions on how to correct the "frozen" RC, nothing changed. Does any one have any idea what's wrong. Thanks for your help.

Greg Stoddard
Co-Captain 1546

Re: Robot Controller seemingly stuck
 

Check to make sure your cable is good. Having an iffy cable can cause all sorts of problems like these.

Re: Robot Controller seemingly stuck
 

best bet would be to contact IFI one way or another, and I would also check their forum to see if this question has been answered before.

http://www.ifirobotics.com/forum/
http://www.ifirobotics.com/contact.shtml

good luck