Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)
-   -   CMU Cam + Lab view Question (http://www.chiefdelphi.com/forums/showthread.php?t=43207)

Dillon Compton 03-02-2006 00:19
CMU Cam + Lab view Question
 
Hi All,

I was wondering is if it is possible to get camera calibration values without the CMU cam being attached to the RC? Can I just hook into a computer running labview somehow and read values in on the screen?

Thanks,
Dillon

Tom Bottiglieri 03-02-2006 00:24
Re: CMU Cam + Lab view Question
 
As far as I knew, using the Labview app was the only way of getting calibration values.

Team 195 Teaser #3: I could probably give you a more to the point answer. That shows how much I know about that camera.

Download Labview Apps for FIRST

Dillon Compton 03-02-2006 00:58
Re: CMU Cam + Lab view Question
 
Quote:
Originally Posted by Tom Bottiglieri
As far as I knew, using the Labview app was the only way of getting calibration values.

Team 195 Teaser #3: I could probably give you a more to the point answer. That shows how much I know about that camera.

Download Labview Apps for FIRST

To clarify: I am wondering if it is necessary to hook the camera to the RC, the Laptop running Labview to the OC Dashboard port, and get the data that way, or if one can simply hook directly between the laptop and the CMUCam, run labview, and have everything be fine and dandy?

Heretic121 03-02-2006 01:42
Re: CMU Cam + Lab view Question
 
Quote:
Originally Posted by Dillon Compton
To clarify: I am wondering if it is necessary to hook the camera to the RC, the Laptop running Labview to the OC Dashboard port, and get the data that way, or if one can simply hook directly between the laptop and the CMUCam, run labview, and have everything be fine and dandy?
yes you can use the Serial port on the camera itself hook that up to the laptop and have it work fine + dandy...

as far as will you get diffrent values or will the picture be diffrent going through the RC i have no idea *im still trying to figure it out myself =(*

Alan Anderson 03-02-2006 10:02
Re: CMU Cam + Lab view Question
 
The calibration values already built in to the camera code should work. The lit vision target this year is a consistent color, and is a lot more trackable than the reflective panels last year were.

Astronouth7303 03-02-2006 16:39
Re: CMU Cam + Lab view Question
 
  1. You can't have the camera connected to a PC and the RC at the same time. It will send to one but not the other.
  2. Last year's Java GUI still works, although it is somewhat buggy.

Dillon Compton 06-02-2006 12:02
Re: CMU Cam + Lab view Question
 
Quote:
Originally Posted by Alan Anderson
The calibration values already built in to the camera code should work. The lit vision target this year is a consistent color, and is a lot more trackable than the reflective panels last year were.

Who says that I'll be traking the vision target?


All times are GMT -5. The time now is 07:29.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi