FVC Height Requirements
 

In the FVC. For the height requirements, can the antenna exceed the height requirements?

Re: FVC Hight Requirements
 

We don't believe that any part on the robot can exceed the 60 in. height requirement. But if others think differently, please post your thoughts.

Re: FVC Hight Requirements
 

I believe this is a question about the FIRST Vex Challenge, not FRC robots (which can be 60 inches tall)
This was asked and answered in the official FVC Q&A system...
No, the antenna cannot protrude above the height requirement.

Re: FVC Hight Requirements
 

This thread belong in the Vex forum.

And the hight limit for FVC is 12", which is the maximum height for everything on your robot, antenna included.

EDIT: Rich beat me to it

Re: FVC Hight Requirements
 

First, questions about FIRST rules should be posted to the FIRST Forums - at least if you want an official answer. As you may have noticed, the first response to your question gave the answer for FRC, where you asked about FVC.

That said, this exact question was posted to the FIRST FVC forum not too long ago, and the answer is that the antenna (and anything else) has to be within the 12 in. height requirement.

Re: FVC Height Requirements
 

I notice you are posting a few FVC questions. I'll make a promotional plug for our website, the Delaware Regional Vex Tournament.

Here we list the three Vex Forums that can assist you with your questions. Each forum exists for a different purpose, use them accordingly.
http://moe365.org/lego/tournament2005/vex.html

There are also links to online Vex training resources here:
http://moe365.org/lego/tournament2005/vexlinks.html

Will you be competing at the Arlington Regional?