Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   pic: 195 Drive Base (http://www.chiefdelphi.com/forums/showthread.php?t=43751)

Tom Bottiglieri 11-02-2006 04:18

pic: 195 Drive Base
 

sanddrag 11-02-2006 04:19

Re: pic: 195 Drive Base
 
Absolutely beautiful. Looks like a 4 speed with plastic gearbox plates. What is the frame made out of? How much does it currently weigh in this configuration? What was your reasoning for going with tracks/belts?

i_am_Doug 11-02-2006 07:34

Re: pic: 195 Drive Base
 
*shivers* Haven't I seen you in my dreams?

Nice placement. I give it a 9/10.
Neatness*unlike the rat home's like in some robots..)*9/10
color....10/10 nice looking blue. was that airbrushed?

And im really loveing the frame design.

I like what you have going on so far. like sanddrag asked; why did you go with the tread design?

Alex Cormier 11-02-2006 09:05

Re: pic: 195 Drive Base
 
Quote:

Originally Posted by sanddrag
Absolutely beautiful. Looks like a 4 speed with plastic gearbox plates. What is the frame made out of? How much does it currently weigh in this configuration? What was your reasoning for going with tracks/belts?

The tranny is a 2 speed as said in the description of the photo.

Tom Bottiglieri 11-02-2006 10:33

Re: pic: 195 Drive Base
 
Quote:

Originally Posted by sanddrag
Absolutely beautiful. Looks like a 4 speed with plastic gearbox plates. What is the frame made out of? How much does it currently weigh in this configuration? What was your reasoning for going with tracks/belts?

As Alex said, this is a the 2-speed version of the plastic 4-speed blind shifter. The 4-speed worked very well for us last year, so we decided to use the same basic design again, we just didn't need all 4 speeds. High: 10.5 ft/s Low: 4.5 ft/s

The frame is made out of 9 ply Baltic birch plywood. That stuff is amazing. It has a strength:weight ratio that is out of this world. And its cheap, easy to make, and makes electronics mounting a breeze. :)

With no batteries, this frame weighs 74 pounds.

We have been using belts since before I was even on the team. I suppose I can say we've got it down to somewhat of a science.

Alex Cormier 11-02-2006 10:41

Re: pic: 195 Drive Base
 
Quote:

Originally Posted by Tom Bottiglieri
As Alex said, this is a the 2-speed version of the plastic 4-speed blind shifter. The 4-speed worked very well for us last year, so we decided to use the same basic design again, we just didn't need all 4 speeds. High: 10.5 ft/s Low: 4.5 ft/s

The frame is made out of 9 ply Baltic birch plywood. That stuff is amazing. It has a strength:weight ratio that is out of this world. And its cheap, easy to make, and makes electronics mounting a breeze. :)

With no batteries, this frame weighs 74 pounds.

We have been using belts since before I was even on the team. I suppose I can say we've got it down to somewhat of a science.

Once again, it's impressive. Can't wait to see it all together. Where ya guys headed?

Tom Bottiglieri 11-02-2006 11:41

Re: pic: 195 Drive Base
 
Quote:

Originally Posted by Alex Cormier
Once again, it's impressive. Can't wait to see it all together. Where ya guys headed?

Winter Warzone, UTC Regional, Championship Event.

Kim Masi 11-02-2006 18:51

Re: pic: 195 Drive Base
 
I really like the design...to me, it almost look like an animation...I mean, it an just be my tired eyes....however, its really neat, cant wait to see what the rest looks like...I really like the color, too.

Rick TYler 11-02-2006 23:28

Re: pic: 195 Drive Base
 
Hey! You better be careful, you know how that plywood bursts into flames!

(Nice robot. Really. It looks great.)

Dan Petrovic 12-02-2006 00:21

Re: pic: 195 Drive Base
 
Wow, that looks really nice!

Let's hope the chassis doesn't take up all of the weight.

BoyWithCape195 12-02-2006 00:28

Re: pic: 195 Drive Base
 
Its 74 pounds for what you see in the picture, not just the frame. :cool: This gives us a solid 46 pounds for any appendages.

sanddrag 12-02-2006 00:31

Re: pic: 195 Drive Base
 
Quote:

Originally Posted by BoyWithCape195
Its 74 pounds for what you see in the picture, not just the frame. :cool: This gives us a solid 46 pounds for any appendages.

For me, that's far too much weight for a drive base, but that's me.

Rick TYler 12-02-2006 01:26

Re: pic: 195 Drive Base
 
Quote:

Originally Posted by sanddrag
For me, that's far too much weight for a drive base, but that's me.

Really? I see a full set of drive components, pneumatics, electronics, and the chassis with 45 pounds available for the game system. The weight sounds good to me.

Tom Bottiglieri 14-02-2006 17:21

Re: pic: 195 Drive Base
 
We were able to go up and get some practice at RAGE's facility last night.

Here's the clip...

Greg Marra 14-02-2006 17:24

Re: pic: 195 Drive Base
 
Quote:

Originally Posted by Tom Bottiglieri
We were able to go up and get some practice at RAGE's facility last night.

Here's the clip...

Solid.

All we have been able to determine so far is that our 2005 robot does not like going up ramps. Our attempts to push it up using its own arm resulted in it tipping backwards. :rolleyes:

Jeff Rodriguez 14-02-2006 18:07

Re: pic: 195 Drive Base
 
I got to see their work in person last night. Wow! Very smooth, very fast, very nice! 195 knows how to do treads and do them right.
Plus, I heard that a periscope goes on top. ;)
Good job guys.

evelyn1503 14-02-2006 18:39

Re: pic: 195 Drive Base
 
looks solid but hevey

Scott Shaw 237 14-02-2006 22:30

Re: pic: 195 Drive Base
 
Looks great like always! Can't wait to see and compete with 195 at UTC this year. They should have a strong contention as always, and I just can't wait. Looking very nice guys. :cool:

Rick TYler 14-02-2006 22:33

Re: pic: 195 Drive Base
 
Quote:

Originally Posted by evelyn1503
looks solid but hevey

What makes you think it's heavy?

Chriszuma 14-02-2006 22:41

Re: pic: 195 Drive Base
 
Quote:

Originally Posted by Tom Bottiglieri
We were able to go up and get some practice at RAGE's facility last night.

Here's the clip...

Very, very nice drive base you've got there.
I noticed that little lcd-adorned box in the corner. What, pray tell, is that to be used for?

Also, what's up with the camera? Did you modify it to look more scifi-robotic?

Jon K. 15-02-2006 00:10

Re: pic: 195 Drive Base
 
Wow, now I am really mad that I went to build our robot versus going to the facility to watch that in action. That looks real nice guys can't wait to see the whole thing(maybe/hopefully Saturday)

Tom Bottiglieri 15-02-2006 06:57

Re: pic: 195 Drive Base
 
Quote:

Originally Posted by Jon K.
That looks real nice guys can't wait to see the whole thing(maybe/hopefully Saturday)

You haven't long to wait my friend. Saturday it will be.

phrontist 15-02-2006 09:16

Re: pic: 195 Drive Base
 
Quote:

Originally Posted by Chriszuma
Very, very nice drive base you've got there.
I noticed that little lcd-adorned box in the corner. What, pray tell, is that to be used for?

Also, what's up with the camera? Did you modify it to look more scifi-robotic?

That is a pivoting ultrasonic range sensor, not a camera.

Heretic121 15-02-2006 12:53

Re: pic: 195 Drive Base
 
wow... smooth... smooth turning... smooth shifting... just amazing like always...

great job guys!!! see you at utc!!!

Gabe Salas Jr. 16-02-2006 12:50

Re: pic: 195 Drive Base
 
Nice clean, and solid design. Good to see it handles well with treads!


All times are GMT -5. The time now is 05:11.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi