Chief Delphi
Page 3 of 5 < 12 3 45 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Week 6 and still not finished! (http://www.chiefdelphi.com/forums/showthread.php?t=43831)

Reyner 14-02-2006 16:05
Re: Week 6 and still not finished!
 
9 Days before ship, we found out that our shooter design was 30 pounds too heave, so we're doing a complete overhaul in less than a week. eek.

dutta 14-02-2006 16:50
Re: Week 6 and still not finished!
 
our building process is about to stall because parts we rush ordered a week ago haven't arrived. we'll be lucky to get 2 full days of testing

Chuck Glick 14-02-2006 19:12
Re: Week 6 and still not finished!
 
Quote:
Originally Posted by Phil Paspalas
:( WARNING: This is a head coach venting!

It's Sunday at the beginning of week 6, 11am. 14" of the white stuff is on the ground and still falling! 2nd year in FIRST and the robot still isn't finshed. Chassis, done! Electrical panels mocked up but not fabricated in polycarbonate yet. Shooter, done. Tilt and swivel assembly for shooter about 65% done. Ball collector/conveyor, about 50%. Ball hopper, less than that. Crate, not built yet! Like last year, we have a great design, but because we try to stick with the philosophy "student designed, student built", things just take a long time. Programming, 85% done. We are submitting an Inventor design for the 1st time along with a 3ds Max animation. Animation, done; Inventor submission, not yet. Website, done and being updated daily! Chaimans award submission, in progress; Woodie Flowers Award, the same. We are doing outreach to a team in a local urban area. 2 of 3 engineer/mentors are currently out of the country. 2 of our teacher/advisors are inactive because of work/family obligations. I guess we bit off more than we could chew, again! We'll get it all done, but...I just wish we could figure this out. :eek:

Phil Paspalas
Head Coach - Team 1676
The Pascack Pioneers
2005 NJ Rookie All-Stars
Runner-up: Montclair Mayhem
Champions: Ramp Riot (Thanks 25!)

i dont want to sound like im bragging or anything but 1712 has a 99% finished robot as of today, we still just need to finish autonomus programming.

Nimmy 14-02-2006 21:57
Re: Week 6 and still not finished!
 
Quote:
Originally Posted by Phil Paspalas
:

because we try to stick with the philosophy "student designed, student built", things just take a long time. Phil Paspalas

Champions: Ramp Riot (Thanks 25!)
so are we, except for the crate, we simply do not have the rescources for it
so we sent it to a carpenter, it's not part of the robot so we don't consider it.

up untill a few days ago I thought MOST teams design and build their own bots (and I don't mean assemble pieces manufactures by factories\engineers)
I mean that's the whole point?

how many teams don't build\design their own bots? just wondering...

KTorak 14-02-2006 22:38
Re: Week 6 and still not finished!
 
Quote:
Originally Posted by Nimmy
how many teams don't build\design their own bots? just wondering...

There is actually a really lengthy discussion on that here: http://www.chiefdelphi.com/forums/sh...2&page=1&pp=15 , from last season.

But for the record, my teams robot is all student/designed and built, however FIRST wrote *negative* comments on our Chairmens Award saying that we needed more Mentors involved and the such.

Billfred 14-02-2006 22:51
Re: Week 6 and still not finished!
 
Quote:
Originally Posted by Phil Paspalas
:( WARNING: This is a head coach venting!

It's Sunday at the beginning of week 6, 11am. 14" of the white stuff is on the ground and still falling! 2nd year in FIRST and the robot still isn't finshed. Chassis, done! Electrical panels mocked up but not fabricated in polycarbonate yet. Shooter, done. Tilt and swivel assembly for shooter about 65% done. Ball collector/conveyor, about 50%. Ball hopper, less than that. Crate, not built yet! Like last year, we have a great design, but because we try to stick with the philosophy "student designed, student built", things just take a long time. Programming, 85% done. We are submitting an Inventor design for the 1st time along with a 3ds Max animation. Animation, done; Inventor submission, not yet. Website, done and being updated daily! Chaimans award submission, in progress; Woodie Flowers Award, the same. We are doing outreach to a team in a local urban area. 2 of 3 engineer/mentors are currently out of the country. 2 of our teacher/advisors are inactive because of work/family obligations. I guess we bit off more than we could chew, again! We'll get it all done, but...I just wish we could figure this out. :eek:
If it's any consolation, we're where we are on what might be the biggest Week 6 rally in the history of our team. (Even the week after we got Bob moving wasn't like this.)

Most of this rally has been in the areas of our hopper and shooter, which has made us quite appreciative of CAD software, lest we'd have more scrap aluminum than the recycling bin at a Coca-Cola shareholder's convention. We're going to be close to the wire on just about everything (time, weight, sanity), but I really think we've got this.

hayakuneko 14-02-2006 23:45
Re: Week 6 and still not finished!
 
Quote:
Originally Posted by sanddrag
With reference to the real robot (not prototypes), we have our frame machined and welded. The machining for everything is probably 2/3-5/7 complete. The conveyor has not been started. No assemby has taken place. However, we have been programming non-stop since the start of week 2.
to add to that... we also have a flag-pole holder!

imax48236 15-02-2006 06:29
Re: Week 6 and still not finished!
 
Quote:
Originally Posted by Cpt_Dave_Lister
Hey at least u guys HAVE students..

I'm practically the only student building along with 2 mentors, the rest...

plays dodgeball

We have a few guys like that on our team. It's either dodgeball or Star-Wars fansites.

Nimmy 15-02-2006 14:54
Re: Week 6 and still not finished!
 
atleast you guys have mentors, we only have 2 teachers and only one of them is present at any given time...

Erin Rapacki 15-02-2006 15:09
Re: Week 6 and still not finished!
 
Yup... what robot?

Wbrown0389 15-02-2006 16:23
Re: Week 6 and still not finished!
 
Haha.....we are soooo far behind....we still just have a chassis.....we are going crazy!!! :ahh:

dude__hi 15-02-2006 16:34
Re: Week 6 and still not finished!
 
Just tweaking the final product, I'm glad we haven't had to make any major changes...now wel''l just have to cross our fingers once we go through inspection...we're using the right brand of pnuematic cylinders this year....

BRosser314 15-02-2006 16:54
Re: Week 6 and still not finished!
 
I think our team is in for the longest and most memorable week 6. We still have not gotten our fram and it is a week before ship. We have every thing else done and ready to go into and on the robot. The biggest week 6 rally is inniated as of today.

King Bob 15-02-2006 22:18
Re: Week 6 and still not finished!
 
We're goin until at least 10 every day from now to the end. We have the whole frame built but still many things to do.

Sgraff_SRHS06 15-02-2006 22:40
Re: Week 6 and still not finished!
 
Quote:
Originally Posted by Freddy204
Yeah, well Team 204 has some more work to do, we are the entirely finish but like 65% done. We are still working on some stuff and finishing trying to get more sponsors for us to attend the Championship.
Ditto. Same with us. Even though we have the promise of our local school board to pay the expenses if we get in the hard way.

EDIT: We have been able to drive the robot for about 2 weeks or so. Our mechanism is about 90% complete and our only lag time now is in controls and programming, where we still have to fix our stuff for our geartooth counters and our gyros. We also still have to mount our camera. Which we should be able to do this week. As I keep reinforcing, we will be ready for our scrimmage at the National Building Museum on Saturday.


All times are GMT -5. The time now is 23:30.
Page 3 of 5 < 12 3 45 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi