Chief Delphi - How to lose that extra weight (Was: Major Help!!)

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - How to lose that extra weight (Was: Major Help!!) (http://www.chiefdelphi.com/forums/showthread.php?t=43912)

KTorak

13-02-2006 22:44

Re: Major Help!!

Quote:

Originally Posted by DjAlamose

Gears should be turned down to a smaller hub, but not too small. And then holes can be drilled in them as well.

Word of caution, be careful with this. We have warped gears before in the homemade transmission our first year (before the 2005 KoP ones) and that really wasnt good.

EricH

14-02-2006 00:26

Re: Major Help!!

Quote:

Originally Posted by KTorak

Word of caution, be careful with this. We have warped gears before in the homemade transmission our first year (before the 2005 KoP ones) and that really wasnt good.

Don't forget to be careful if you take large areas out of both gears and sprockets. We did that one year, but didn't find out until that fall, when we broke that sprocket at a postseason.

All times are GMT -5. The time now is 16:13.

Page 2 of 2

Show 100 post(s) from this thread on one page