pic: 1023 Teaser #1
 

Re: pic: 1023 Teaser #1
 

That looks like your ball lifter belt. :)

Re: pic: 1023 Teaser #1
 

This is a toughie,so I have a couple guesses:
The material in front of the light is
1. A net to catch your balls, or
2. A belt to pick up the balls.
The light behind the material is
1. A scanner light?

Re: pic: 1023 Teaser #1
 

it looks like a outer frame for a hopper to hold all of the balls.

Re: pic: 1023 Teaser #1
 

i'm gonna go with the first one and say it's the belt, the bright part is the metal fastener thing to join the ends of the belt material together

Re: pic: 1023 Teaser #1
 

I'm going to say you've installed a utensil drawer in your robot and thats non slip matting so the forks and spoons don't mix . . . or its a belt

Re: pic: 1023 Teaser #1
 

Bumper fabric.

Re: pic: 1023 Teaser #1
 

loooks like someone else is using bumpers???

Re: pic: 1023 Teaser #1
 

Belting, used to move balls from one place to another.
(Now how fast they exit the end is not evident from the pic... ) :)

- Keith

Re: pic: 1023 Teaser #1
 

I have to say that no one is really close to being right....regarding material or use :) I'll reveal it Monday night unless someone figures it out before then.

Re: pic: 1023 Teaser #1
 

Is the material metal mesh (stupid, I know, :) ) or a synthetic fabric like nylon, and is the light a light source or is it the camera flash reflecting off something? :confused:

Re: pic: 1023 Teaser #1
 

Ok. So since no one guessed it, this is corrugated plastic (like cardboard) that we used for our hopper. It's very very light at a whole 1/4 lb per sq foot. The white light is also the flash from my camera.

Re: pic: 1023 Teaser #1
 

Yet so close and yet so far... :)