please help me to plag in the camera
 

how do i g\plug in all the connectors of the camera the right way?
i mean i plugged the power to pwm1
and the rs232port (3pin) to the ttl adapter and to the ttl on the rc
and the servo's connections i plugged into the servo1 and servo0 on the camera...
please help me with what I should do

Re: please help me to plag in the camera
 

If you're using the camera code written by Kevin Watson, don't connect the servos directly to the camera. The code controls the servos using pwm01 and pwm02.