Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   Got Weight? (http://www.chiefdelphi.com/forums/showthread.php?t=44155)

Dominicano0519 02-16-2006 10:00 PM

Got Weight?
 
(starts talking in infomercial guy's voice) Is you robot overweight, does your team think that they just wasted 6 hard weeks of work. No worries Ill have the perfect solution as soon as i think of one. please help me with any ideas

Adam Richards 02-16-2006 10:03 PM

Re: Got Weight?
 
Quote:

Originally Posted by Dominicano0519
(starts talking in infomercial guy's voice) Is you robot overweight, does your team think that they just wasted 6 hard weeks of work. No worries Ill have the perfect solution as soon as i think of one. please help me with any ideas

Step 1: Get Drill
Step 2: Insert 1/2"-1" bit into drill
Step 3: Drill Those Speed Holes!

Clam 02-16-2006 10:46 PM

Re: Got Weight?
 
remove unecessary components that would be cool, but would add weight.
use lighter material (ie: aluminum)...
see news updates...

tammuoisau 02-16-2006 10:47 PM

Re: Got Weight?
 
LIGHTNING HOLES, that's a hint

Tomasz Bania 02-16-2006 10:55 PM

Re: Got Weight?
 
Make enough holes so you can use your robot as a CHEESE GRATER at the end of the season! :)

:cool: Tomasz Bania :cool:

pwilczynski 02-16-2006 10:59 PM

Re: Got Weight?
 
Quote:

Originally Posted by Dominicano0519
(starts talking in infomercial guy's voice) Is you robot overweight, does your team think that they just wasted 6 hard weeks of work. No worries Ill have the perfect solution as soon as i think of one. please help me with any ideas

if you're using a shooter with two wheels, you could try cutting out some of the spokes and putting some cardboard over it so that it would be just as aerodynamic but weigh less.

henryBsick 02-16-2006 11:01 PM

Re: Got Weight?
 
Holes help. I think in the past 3 days my team has taken 6-7 pounds off of our robot. Get a couple drills ready, they do heat up when run for a long time.

Tom Bottiglieri 02-16-2006 11:01 PM

Re: Got Weight?
 
Take the white space out of your program.

Billfred 02-16-2006 11:32 PM

Re: Got Weight?
 
Quote:

Originally Posted by Tom Bottiglieri
Take the white space out of your program.

Ha.

But getting back to the speed holes, I'll put in the boilerplate: don't be stupid with the swiss cheesing. Poking a bunch of holes in your hopper that was built around the requirement of having a perfectly smooth bottom may come back to bite you in your bottom.

Just be smart about where you poke holes, and you'll be good.

adam 02-16-2006 11:33 PM

Re: Got Weight?
 
Quote:

Originally Posted by Tom Bottiglieri
Take the white space out of your program.

good idea

ryan_f 02-16-2006 11:46 PM

Re: Got Weight?
 
Switch the air in your tires with helium.

Chriszuma 02-17-2006 12:35 AM

Re: Got Weight?
 
drill one-way holes in your air cylinders.

Then refill your brake light fluid.

And change your muffler bearings.

Rick TYler 02-17-2006 12:49 AM

Re: Got Weight?
 
Don't forget to remove all the comments in your code, and scrape the insulation off all the wiring.

Eldarion 02-17-2006 12:55 AM

Re: Got Weight?
 
And drill holes in the RC, radio, and camera. ;)

Seriously, though, it looks like we will be underweight...by 2 pounds! :rolleyes:

Chriszuma 02-17-2006 01:00 AM

Re: Got Weight?
 
Use a smaller font in the code.

Also, avoid using entire colons when a semicolon would work just fine.


All times are GMT -5. The time now is 12:50 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi