Invalid Address
 

I brought up the IFI Loader and tried to load up our hex file, but a message came up that said:

Invalid Address: 0x0 (correct Range: 0x800-0x7fff)

How do I fix this

Re: Invalid Address
 

What version of the IFI Loader are you using?

Sean

Re: Invalid Address
 

v-1-0-0

Re: Invalid Address
 

Uninstall 1.0.0 and install 1.1.0 (2 Feb 06)

http://www.ifirobotics.com/docs/ifi-loader-v1-1-0.zip

Post if it fixes your problem.

Sean

Re: Invalid Address
 

I still recieved an invalid address range error

Re: Invalid Address
 

Take a look at this thread:

http://www.chiefdelphi.com/forums/showthread.php?t=25662&highlight=Invalid+Address%3 A+0x0+%28correct+Range%3A+0x800-0x7fff%29

found this by searching for:
Invalid Address: 0x0 (correct Range: 0x800-0x7fff)

(search on the Orange bar above the ads)

(change the 18f8720.lkr with 18f8722.lkr - in the answer)

Sean

Re: Invalid Address
 

18f8722.lkr is the linker I have in it

Re: Invalid Address
 

Hmm, let's see. Maybe do a 'Clean' (Project, Clean in MPLab). Also, check to make sure the device in the Configure, Select Device is the 18F8722 processor.

Sean

Re: Invalid Address
 

Yes I have that device selected, now, when I am exporting the hex, do I need to edit anything on the window that pops up? Program Memory Areas?

Re: Invalid Address
 

under the program memory checked box it has Start:0 End:0x1fffe

Re: Invalid Address
 

I don't think you need to do the export. Just do a build (F10 or CTRL-F10) and then grab the .hex file that is created. I've never had to do export to get a .hex file that will load.

Sean

Re: Invalid Address
 

Well, when I clicked build all, it didn't do anything.

Re: Invalid Address
 

It sounds like a configuration problem. Has it worked in the past?

Sean

Re: Invalid Address
 

It built when I was over at Bosch, but it hasn't worked since I brought it here.

Re: Invalid Address
 

So, I have the program all ready to go, but I can't download it to the robot.

Re: Invalid Address
 

Can anyone solve this?

Re: Invalid Address
 

I'm back.

Send me your project file. Let me see if I can see any problems.

Sean
sean@toltechs.com

Re: Invalid Address
 

That's not normal. Are you sure you opened the project (.mcp file) using the Open... command of the Project menu, and not just the individual source text files using the File menu?

Re: Invalid Address
 

Could it be your output window is simply not visible. See if my post in this thread helps.

Re: Invalid Address
 

E-mail is hard, since this is a school computer (curses websense :mad: ). When I tried to make/build, it froze for a sec, and did nothing.

Re: Invalid Address
 

K, used the teachers E-mail