Festo Single solenoid
 

Quick question for you pneumatic wizards out there. Anyone have an idea how to wire a Festo single solenoid? The directions that are supposed to be in the box aren't and we're ruminating over how to wire the beast into the entire system.
Any assistance appreciated.

Team 1163

Re: Festo Single solenoid
 

The basic idea for single solenoids is that you hook the red wire to the M+ side of a spike and ground to the other side. Run the spike forward, and the solenoid will activate. Don't run it backward.

Re: Festo Single solenoid
 

Thanks Steve. Does the red/white wires come out of the black attachment point on the top of the solenoid? We can't seem to find any other way of wiring the beast.

Re: Festo Single solenoid
 

This may be a little late but instructions are here.

1=negative
2=positive
3=not used

Re: Festo Single solenoid
 

Andy,

Thanks loads. We never did get the solenoid wired and I looked at Festo for hours. We'll get it done at competition.

J Price, mentor
1163