Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   1501 Robot Video's (http://www.chiefdelphi.com/forums/showthread.php?t=44458)

roboticsguy1988 21-02-2006 00:02

1501 Robot Video's
 
Here is a link to a list of videos that we took of our robot shooting, etc. Feel free to check them out. :D

'The Scorpion' Videos

Levin571 21-02-2006 00:04

Re: 1501 Robot Video's
 
that is one amazing shooting machine you got there!

Master Spoon 21-02-2006 10:06

Re: 1501 Robot Video's
 
Very nice shooter. Its accuracy is flawless!

roboticsguy1988 21-02-2006 10:23

Re: 1501 Robot Video's
 
We love it at least. Now we just need to find our buffer... :D. :ahh: Blinded by the robot. Oh btw if you take a picture at the competition, make sure to watch the flash from your camera, you don't want a white picture, lol.

Wayne Doenges 22-02-2006 05:31

Re: 1501 Robot Video's
 
I think this is the first video that shows a robot moving and firing at the same time.
It can also walk and chew gum at the same time :) Of course chewing gum and firing gets to be kind of messy :D
See you at Boilermaker. Good luck to all FIRST'ers.

roboticsguy1988 23-02-2006 00:28

Re: 1501 Robot Video's
 
Here are some more pictures of our robot too....

http://www.teamthrust.us//index.php?...&id=37&catid=4

Chriszuma 23-02-2006 00:33

Re: 1501 Robot Video's
 
That is a truly amazing robot. You guys really raise the bar for everybody.

Dan Petrovic 23-02-2006 16:53

Re: 1501 Robot Video's
 
How heavy is that launch wheel? And what do you use to power it?

Wayne Doenges 23-02-2006 19:55

Re: 1501 Robot Video's
 
The launcher is made up two 7" wheelchair wheels tied to one of the large CIM motors. The motor turns at 2500 rpm :ahh:
Near the motor is a gear and gear tooth sensor that adjusts the motor rpm to compensate for the load of the ball as it is launched (closed loop). Thus the motor doesn't bog down with multiple ball launches.
Our ball elevator uses the FP motor and gearbox.


All times are GMT -5. The time now is 20:27.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi