Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   "Quotes" that were said during build season (http://www.chiefdelphi.com/forums/showthread.php?t=44654)

Oblarg 27-01-2014 21:47

Re: "Quotes" that were said during build season
 
"Go eat so you can be useful" was a choice one from a few meetings ago. Blood sugar is important for maintaining productivity, folks!

(After finally finding a hex bearing which would actually fit on one of our gearbox shafts) "It's like winning the lottery, sort of, if the lottery jackpot were about $3 and you were forced to buy tickets to make your robot work."

"As best we could tell, this piece of tubing had a demon in it, which we have exorcised."

"Clearly, we forgot the ritual sacrifice to the NI gods. Quick, fetch a goat!"

bbradf44 27-01-2014 21:56

New team motto "It doesn't work..." Said many times when trying to drive and noticing a jag was fried, then after the second attempt noticing our DSC was DOA, then again for the third time when we ran the code and only 1 wheel decided to spin.. This has not been a very good year for us so far hopefully we can turn it around in the next 2 weeks

zsm150 27-01-2014 22:10

Re: "Quotes" that were said during build season
 
"It cant be my fault, I never even touched the robot!"-Programming lead

reid.elliott 28-01-2014 00:01

Re: "Quotes" that were said during build season
 
"Ehhh...close enough."

"GRAVITY CHECK!" preceded by something clanging to the floor

"Tom, can you go find a shaft stretcher?"

"Chris, drink this." (Chris drinks slightly soapy water)

A:"But this *insert improvement here* could make it better!"
B:"The question is, is it good enough?"


"Joe! What did you do!?"(He didn't actually do anything but is always present when something breaks.)

Joseph1825 28-01-2014 00:50

Re: "Quotes" that were said during build season
 
"Well, it's pretty straight."

Nirvash 28-01-2014 02:00

Re: "Quotes" that were said during build season
 
Team Lead: How'd it get bent?
Me: They hit it with a hammer. (Referring to two people)
Person one: No we didn't!
Person two: Yes... we did.

Zuelu562 28-01-2014 07:12

Re: "Quotes" that were said during build season
 
"When something goes wrong mechanically, we blame Clever."
"When did the word "mechanically" begin meaning "at all"?"

riverdrake250 28-01-2014 20:26

Re: "Quotes" that were said during build season
 
1: Is that lexan?
2: That's cardboard.

Bewizardment 28-01-2014 20:32

"Quotes" that were said during build season
 
During the 2014 season, we have decided (because of a mispronunciation by a student) to refer to the winch mechanism on our robot as a "wench."

It's been decided that we need to use air quotes every time we talk about our wench around a referee.

boynton78366 28-01-2014 20:39

Re: "Quotes" that were said during build season
 
Person 1: "why is this metal hot?"
Person 2: "because we just welded it..."
Person 1: "oh well that explains everything"

Team3324 28-01-2014 20:42

Re: "Quotes" that were said during build season
 
Should I wire that?
-Electrical Team Lead

Jacob Bendicksen 29-01-2014 00:33

Re: "Quotes" that were said during build season
 
"Who said we couldn't do that?"
"Reality."

"It's not dodging the problem if it's a solution."

NWChen 29-01-2014 00:36

Re: "Quotes" that were said during build season
 
"What should we name our crimpers?"

calvinstence 30-01-2014 21:45

Re: "Quotes" that were said during build season
 
"Giving the robot to the electronics team is like watching a child go off to school for the first time" -- a fellow mechanical team member

"The sprocket doesn't fit through the hole!"
"Well, take it off the shaft."
"That's not going to happen- I put a pin through all of it, epoxied it, and put in the set screw."
"...Oh."
"Time for some fine adjustment."

Peregrinus 30-01-2014 23:52

Re: "Quotes" that were said during build season
 
Quote:

Originally Posted by Team3324 (Post 1333906)
Should I wire that?
-Electrical Team Lead

This is my most used phrase along with, "It's not the electrical, it's the programming"


All times are GMT -5. The time now is 17:54.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi