Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)
-   -   "Quotes" that were said during build season (http://www.chiefdelphi.com/forums/showthread.php?t=44654)

sayso_411 28-08-2008 20:56

Re: "Quotes" that were said during build season
 
Its been a fun season! I m already set for the next!
:D

seg9585 29-08-2008 17:23

Re: "Quotes" that were said during build season
 
Not as much a quote but more of a story:

After we powered up our bot last season at the competition, for some unknown reason after its been sitting idle for about a minute, the code error light turns on (requiring an RC reset to work correctly). So sometimes when we put the bot out on the playing field right before a round and the judges are taking a long time to introduce the teams, we got that annoying code error light and would have to reset it (using the button on our OI), otherwise our autonomous mode would not run. So every round the drivers and I (field coach) would helplessly stand there praying the code error light didn't turn on again before the round officially started.
Several times I sprinted back onto the playing field while the judges introduced the teams (with the judges permission of course) to power down the bot and power it back up and hope that darned light never came back on.

ZInventor 31-08-2008 16:56

Re: "Quotes" that were said during build season
 
Me (mechanical team) to a programmer when we realised we were a few ounces from being under 120 pounds...


Z- hey, i was wondering, do you guys think you could make your bits lighter?
CS- i'm not sure, but that seems like it's a hardware problem, the chips are physical objects aren't they?

we then realised that we had used 1/4 inch lexan as a shield for our control board... yes, it's overkill, yes, it weighs 5 pounds, and yes, it's important to bullet-proof the control board...

ReapersRule 21-09-2008 18:17

Re: "Quotes" that were said during build season
 
One day our team was eating KFC for dinner. Kate is sitting next to the Mountain Dew.
Matt and Joe are seniors (or were, they have graduated since), Kate is Joe's younger sister.

Matt: Hey, Kate, is there any Mountain Dew left?
Kate: Yes.
Matt: Hey, Kate, Dew me!!!
At this time the entire team bursts out laughing.
Joe (after a half second): That's my sister!!!!!!!

ReapersRule 22-09-2008 14:22

Re: "Quotes" that were said during build season
 
We were voting on how many wheels the robot should have at the beginning of the build season. Our mentor gave everyone a slip of paper and told them to write how many wheels they thought the robot shoud have on it. After, we were counting votes. This is not exact words.

Mentor - Six, six, four, six, ... Apple Pie! What the...!!!
Team starts laughing
J.Z. - that was me.
J.H. - What the ****!!! I voted for that too!!!
Mentor - What the!!! You two were across the room from eachother!!! And who voted for unicycle?
Team laughs even harder
C.G. (my BFF) - *raises hand*

carolynn4848 22-09-2008 14:24

Re: "Quotes" that were said during build season
 
you forgot the part where a senior looked at me and said

"You.... are a genious"

Spartan151 24-09-2008 15:08

Re: "Quotes" that were said during build season
 
"There's something you know that I don't. Which closet did you lock it in?"

This was said a good while ago, just before our last Bayou Regional. Just remembered it. =P

Raumiester2010 24-09-2008 20:37

Re: "Quotes" that were said during build season
 
from our about 50 year old engineer: "We pimped it good!" (shortly after we got our articulating chassis working from last year)

m3ch4num470r 07-10-2008 13:56

Re: "Quotes" that were said during build season
 
Me: "We need to find a girlfriend for Eric."
Eric: "What? You need to find a drillpress for me?"
Me: "Yeah, lets go with that. We need to find a 'drillpress' for him."

Chris/Fish 06-11-2008 09:04

Re: "Quotes" that were said during build season
 
"But that would have required planning ahead"
--answer to any idea that would have made our lives a lot easier if we had thought of it a month ago.

lenny8 06-11-2008 09:27

Re: "Quotes" that were said during build season
 
Go to Woooork! - Josh Sjorsma

I dont know how to use the bandsaw... - Student not to be named:]

Lenny: so how heavy are our balls? (Track balls)
Ollie: We have 10 pound balls lenny
John: no. our balls are 8 pounds
Ollie: HE mite have 8 pound balls but we have 10 pound balls

Anna B. 06-11-2008 16:23

Re: "Quotes" that were said during build season
 
"Anything's a nail if you have a big enough hammer"

Cyberphil 06-11-2008 17:54

Re: "Quotes" that were said during build season
 
"Whats a Track ball?" asked one of the second year members.

admalledd 07-11-2008 11:42

Re: "Quotes" that were said during build season
 
"It didn't work so i just deleted it." -- rookie programmer(code folder befor: 2mb after:16 kb)


"steerings broke! fix it!" "why you telling me? i program. i can make you a manual of how to fix it though."

"we need more pot!"--me forgetting to add the "entiometers" at the end.

"let me go! i did your work now let me eat!"--me being ducktaped to a chair to finish the programming(time in chair: 8 hours) now we have 5 programmers instead of one *me*

samir13k 07-11-2008 18:47

Re: "Quotes" that were said during build season
 
Samir, don't electricute yourself!


All times are GMT -5. The time now is 03:56.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi