Chief Delphi - Reading and writing to RX/TX on vex

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Reading and writing to RX/TX on vex (http://www.chiefdelphi.com/forums/showthread.php?t=44720)

whsrobotics

24-02-2006 20:40

Reading and writing to RX/TX on vex

How would I read and write to the RX/TX ports on top of the vex (next to the 16 digital I/O ports) in mplab? Any help or information at all would be helpful.

Thanks.

Mike	24-02-2006 22:03

Re: Reading and writing to RX/TX on vex

Quote:

Originally Posted by whsrobotics

How would I read and write to the RX/TX ports on top of the vex (next to the 16 digital I/O ports) in mplab? Any help or information at all would be helpful.

Thanks.

I'm not familiar with the vex platform, but I know that if I wanted to do something like this on the normal IFI controller, I would look at the datasheet for the chip inside the controller. Find the registers that control the USART and see what values are needed for sending/receiving.

All times are GMT -5. The time now is 03:17.