Chief Delphi
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube (http://www.chiefdelphi.com/forums/showthread.php?t=44738)

Bob Steele 25-02-2006 14:37
pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 

Astronouth7303 25-02-2006 14:47
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
I'm pretty sure Hell freezes over on a regular basis. I wonder what it is now...

Shucks, only 33 degrees.

(And yes, I am talking about a real place. :D )

Koko Ed 25-02-2006 15:15
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
You guys better call the cops.
Looks like someone stole your wheels. :D

Alex Cormier 25-02-2006 15:19
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
possibly omni wheels?

Koko Ed 25-02-2006 15:20
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
Quote:
Originally Posted by Alex Cormier
possibly omni wheels?
Invisible Omni-wheel....
You and your omni wheel fetish. :rolleyes:

KenWittlief 25-02-2006 15:44
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
would look awesome with lights inside!

Devil2005 25-02-2006 16:27
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
Now, i know that ship was tuesday and it took you guys till saturday to put up a pic? Its about time, but I'm still a little curious bout it. Can u tell me anything more? I'd say everything is rather hidden behind you ice cube on wheels, or better yet, blocks.

Erics626 25-02-2006 17:39
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
The wheels are on there all right :D . The blocks are there to hold up the bumpers, which we won't put on 'til after weigh-in. I don't think I supposed to say anything more about the robot, so I'll wait and see if we have permission to release any information on it.

Bob Steele 25-02-2006 17:44
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
Eric...go ahead tell them all about it...
Hey, is this Devil2005 an ex-Devil? with the initials Ryan Mills?


Quote:
Originally Posted by Erics626
The wheels are on there all right :D . The blocks are there to hold up the bumpers, which we won't put on 'til after weigh-in. I don't think I supposed to say anything more about the robot, so I'll wait and see if we have permission to release any information on it.

Alex Cormier 25-02-2006 17:47
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
Quote:
Originally Posted by Bob Steele
Eric...go ahead tell them all about it...
Hey, is this Devil2005 an ex-Devil? with the initials Ryan Mills?
so, what's your drivetrain?

Bob Steele 25-02-2006 17:51
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
Oh crap... I knew there was something we had forgotten...!!
We will just have to have our alliance partners scoot us around on the wooden blocks...



Quote:
Originally Posted by Alex Cormier
so, what's your drivetrain?

Erics626 25-02-2006 17:51
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
All right, let's see if I can get this all right....somebody correct me if I'm wrong. Drive-train consists of two CIM motors with Dewalt transmissions chained to run three wheels per side. The robot has six wheels and sits on four in normal competition. In the rear there are omni-wheels and in the front there are 10" pneumantic wheels(?). In the center we have smaller wheels that are used in assistance in getting up the ramp. Our goal is to be an effective one-point herder and a decent three-point shooter. The bottom of the robot has an opening for a spinning cylinder driven by a CIM motor. The ramp up into the robot has fingers that open and close to allow for the CIM motor to get up to speed before we shoot the balls back out. The bottom portion of the robot is mostly empty space for ball holding. Our three-point shooter is human-loaded only. The shooter is also driven by a CIM motor, and has a servo controlled gate that opens up after the motor has gotten up to speed. We shoot one at a time, but I am unsure of the distances. That's all I can think of right now.

Alex Cormier 25-02-2006 17:55
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
Quote:
Originally Posted by Erics626
All right, let's see if I can get this all right....somebody correct me if I'm wrong. Drive-train consists of two CIM motors with Dewalt transmissions chained to run three wheels per side. The robot has six wheels and sits on four in normal competition. In the rear there are omni-wheels and in the front there are 10" pneumantic wheels(?). In the center we have smaller wheels that are used in assistance in getting up the ramp. Our goal is to be an effective one-point herder and a decent three-point shooter. The bottom of the robot has an opening for a spinning cylinder driven by a CIM motor. The ramp up into the robot has fingers that open and close to allow for the CIM motor to get up to speed before we shoot the balls back out. The bottom portion of the robot is mostly empty space for ball holding. Our three-point shooter is human-loaded only. The shooter is also driven by a CIM motor, and has a servo controlled gate that opens up after the motor has gotten up to speed. We shoot one at a time, but I am unsure of the distances. That's all I can think of right now.
ahha! i knew i would see omni wheels on that beast!

Courtneyb1023 25-02-2006 18:37
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
Is the hopper material corrugated plastic? That's what we used. Its pretty strong and really light weight.

Koko Ed 25-02-2006 18:44
Re: pic: Team 1018 -Pike RoboDevils - The Devils' Ice Cube
 
Quote:
Originally Posted by Alex Cormier
ahha! i knew i would see omni wheels on that beast!
Oy! :rolleyes:


All times are GMT -5. The time now is 03:07.
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi