pic: Beach 'Bot view 1
 

Re: pic: Beach 'Bot view 1
 

Very interesting looking bot. Care to elaborate on its functions and specs?

Re: pic: Beach 'Bot view 1
 

Functions and specs:
Loading: floor or human
Drive: 4 CIM kit tranny
Shooter: Double wheel single axle, powered by a large CIM. Also has corner capabilities.
Carries: somewhere around 20 balls.

Re: pic: Beach 'Bot view 1
 

i love the design, good work guys

Re: pic: Beach 'Bot view 1
 

Hey, do you guys shoot from a high point on your robot or a lower point (around the middle)??

btw... nice lookin' bot... can't wait to see it in action at Arizona and LA :D

Re: pic: Beach 'Bot view 1
 

Yeah, where exactly do you shoot from, I cant really see it, care to post a pic of the shooter?

Re: pic: Beach 'Bot view 1
 

Our shooter (and corner goal spitter) are both in the blue sectiion of our robot

You can just see the top of our double wheel shooter

Feel free to ask any other questions.

Re: pic: Beach 'Bot view 1
 

Ahh, okay, thats where i thought they were. Wasn't sure though. Thanks.

Re: pic: Beach 'Bot view 1
 

This doesn't completely clarify since the blue portion goes from the lower part of the robot the upper part. You say "corner goal spitter" so I think maybe it's lower. But you say we can see the top wheel of the shooter, and the only other wheel I can find is at the top. Another picture would be appreciated, but if you're too busy it is quite understandable at this point.
Hope to play with you guys at Davis!

Re: pic: Beach 'Bot view 1
 

The shooter wheel is what you see sticking out from behind the upper left corner of the white spiral staircase. Viewed from this angle, the balls will be shot out to the right.

The balls are picked up from the floor at the bottom of the yellow elevator. They are lifted up and dumped in the top of the ramp. (The top is open, so that it can receive balls from the human player too.) At the bottom of the ramp, a conveyor carries the balls to the left, and up to the shooter, or it can be reversed to spit the balls out toward the right, into a corner goal. The time from a ball being picked up to being shot is approximately 4 seconds.
Sorry, were going to the Arizona regional this year instead of to Davis.

Re: pic: Beach 'Bot view 1
 

Would you mind sharing what you used for your ball sweeper conveyor material? It doesn't show in this pic.

Nice bot. Glad you're not coming to the PNW. We have the Cheesy Poofs coming -- that's bad enough.

Re: pic: Beach 'Bot view 1
 

I really dig the overall design of this one. Good job on another solid robot. Hope that everything works as well as we all hope it does. I still dont fully understand the ball spitting. Do the balls come out where they get sucked in or somewhere on the blue section? Still, i want to emphasize the really good design i see in this one. Additionally, maybe its just me but it looks pretty hard to load by way of human....

Cool Robot you guys!

Re: pic: Beach 'Bot view 1
 

So we basically pick the balls up with PVC rollers driven by 1 fisher price motor then they are brought up with belting (I'm not exactly sure the type it is) and then dropped into the spiral. Then the balls just go through the spiral and end at a series of belts that are driven by another fisher price motor to either be ejected into the small goals or brought up to the shooter. The shooter is powered by the big CIM and uses two parallel 8" Skyway wheels to shoot the balls. The drive train is just 6 pneumatic tires. We are also using the camera and a yaw rate sensor which you can't really see. If you have any other questions or want to see more pix let me know. :)

-Mac

Re: pic: Beach 'Bot view 1
 

Yeah. That is definitely not the preferred method of loading. It's not a very large target for an HP to hit.

Re: pic: Beach 'Bot view 1
 

so how many balls can this beast hold? I'm surprised to see so many bots with the spiral helix decision and i love it!