Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Robot Showcase (http://www.chiefdelphi.com/forums/forumdisplay.php?f=58)
-   -   pic: Team 1872 (http://www.chiefdelphi.com/forums/showthread.php?t=45015)

Armando Gonzalez 05-03-2006 00:58
pic: Team 1872
 

Armando Gonzalez 05-03-2006 00:59
Re: pic: Team 1872
 
Quote:
Originally Posted by Namelesspr
Thread created automatically to discuss this image in the Picture Gallery.

Well, what do you guys think? XD

Alex Cormier 05-03-2006 01:09
Re: pic: Team 1872
 
i love it! do you guys have any problems of the balls coming back out after shooting into the goal?

Joe J. 05-03-2006 01:15
Re: pic: Team 1872
 
Thats a nice looking bot. I love the chain guards.

That collector and feeder system is so simple you all most don't see it at first glance. :] Two pulleys and one belt; we have 28 pulleys & 15 belts driving 13 rollers :rolleyes:

Good Luck in Competition!

Armando Gonzalez 05-03-2006 01:19
Re: pic: Team 1872
 
Quote:
Originally Posted by Philmont629
Thats a nice looking bot. I love the chain gaurds.

What kind of mechanisim are you using to pick up the balls and fed them up?

Good Luck in Competition!
We pick them up from the front, we have a little conveyor belt on the back.

Armando Gonzalez 05-03-2006 01:26
Re: pic: Team 1872
 
we only have problems of the balls coming out of the goal when the goal has too many balls inside

EricH 05-03-2006 01:42
Re: pic: Team 1872
 
Do you have any problems with ball escaping sideways in the harvester? Also, are you guys sure your flag holder (I'm assuming it's the little tube behind the collector) is high enough? You need to have the top of a 3-foot tube at least 1 foot above your robot, but less than 6 feet, and held by a 1-foot tube. By my calculations (using the ball in the picture and guesstimating), you need it about a foot higher. Other than that, nice and simple.

Armando Gonzalez 05-03-2006 01:51
Re: pic: Team 1872
 
Quote:
Originally Posted by EricH
Do you have any problems with ball escaping sideways in the harvester? Also, are you guys sure your flag holder (I'm assuming it's the little tube behind the collector) is high enough? You need to have the top of a 3-foot tube at least 1 foot above your robot, but less than 6 feet, and held by a 1-foot tube. By my calculations (using the ball in the picture and guesstimating), you need it about a foot higher. Other than that, nice and simple.
na the ball doesn't escape sideways on the harvester, the belt is runing so fast that it only takes a second for one ball to get in. And thanks a lot about the tube thing, I did not know that it had to be a foot over the robot

Adam Richards 05-03-2006 02:32
Re: pic: Team 1872
 
Great looking bot! I'm definitely going to have to swing by your pits take a look at this next Thursday.

YonZ 05-03-2006 04:01
Re: pic: Team 1872
 
I like your use of gravity

very interesting choice about control panel though, it's the first time I haven't seen victors, controllor, etc nowhere near the base.

nehalita 05-03-2006 10:39
Re: pic: Team 1872
 
looks great! can you go up the ramp? do you have an autonomous?
can't wait to see it at UCF

Armando Gonzalez 05-03-2006 21:24
Re: pic: Team 1872
 
yeah we can go up the ramp, the back part of the robot is pushed by a piston; so it goes up and we can go up the ramp easily

the piston is not showed on this picture, we added it afterwards :D

Tazlikesrobots 06-03-2006 13:34
Re: pic: Team 1872
 
Goo luck my fellow Boriquas! :D


All times are GMT -5. The time now is 05:34.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi