Chief Delphi - Quick XRP question.

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Quick XRP question. (http://www.chiefdelphi.com/forums/showthread.php?t=45413)

lukevanoort

13-03-2006 19:53

Quick XRP question.

Does anybody know roughly how long the whole DeWalt XRP tranny and CIM motor assembly is?

Francis-134

13-03-2006 21:13

Re: Quick XRP question.

Although I don't have the exact dimensions on me, I can tell you that the Dewalt transmissions that my team built are between ten and twelve inches long. Perhaps I can get you a measurement tomorrow from one of our spares.

Kevin Sevcik

13-03-2006 21:34

Re: Quick XRP question.

Had you asked me friday, I could've just taken the measurement. As I recall, the assembly is something around 8 inches long.

gren737

14-03-2006 10:46

Re: Quick XRP question.

from the edge of the threads on the nose to the back of the cim is just about 9.5"

make sure you leave a little space behind the cim for the wires tho, since they come out the bottom

lukevanoort

15-03-2006 17:05

Re: Quick XRP question.

Thanks for the info.

All times are GMT -5. The time now is 18:49.