pic: 177 The Robot
 

Re: pic: 177 The Robot
 

If theres any question about the 177 Caded robot, unfortunately i wont be able to answer them till sat night(competing in Philly). Im wishing for internet at the sheraton hotel.

Thanks

Re: pic: 177 The Robot
 

Looks nice!

I can tell that you guys spent a LOT of time on that CAD modeling. Good work!

Re: pic: 177 The Robot
 

Love the lighting effect from cad! How long did it take you guys to put this all together in cad?

Re: pic: 177 The Robot
 

For our five man CAD team, between learning inventor, designing, and drawing the robot, it took about 100 hours.

Re: pic: 177 The Robot
 

WOW!!! i know this is off topic from your CAD model but... does anyone know if some one has CADed out the '06 field? i looked on the FIRST website for it but couldn't find it! I can CAD a little but when i tried it didn't look right. All that i am looking for is like individual goal "sides" a side being the center goal, (2) corner goals, and the ramp.

Re: pic: 177 The Robot
 

I don't know where you can get the CAD models, but the FIRST website gives all the specs. I usually just make really rough extrusions of the field elements and use these. If your a stickler for accuracy you can download all the field pieces from http://www.firstcadlibrary.com/, only problem is... well... there not assembled...



As for the robot. Very cool. however I don't understand the conveyor thingy on the front. Looks too high to pick up balls, so does it shoot 1pt? All the same, nice work...

Re: pic: 177 The Robot
 

Team 103 has it and is willing to share: http://www.chiefdelphi.com/forums/sh...field+inventor

Re: pic: 177 The Robot
 

It does both. It's on a slider so it can lower down and pick up balls, then we can withdraw it and push them out.

Re: pic: 177 The Robot
 

Re: pic: 177 The Robot
 

Hahaaa. and from my 2 man CAD team it took like 250. but nevertheless, it still looks like your takes the cake by far. Nice work, id like to see how next years comes out.