Where Could I Purchase #35 Chain?
 

Hey,
I looked everywhere for #35 Chains, and I just cannot seem to find an online store that sells them (or a trustworthy online store). The first placed I tired was the IFR Robotics, and they seemed to be out of stock for the year, and then I tired eBay, but the sellers do not ship to Canada. So. If you know a place, or an online store that sells and ships to Canada, I would appreciate your reply =)


-Dave

Re: Where Could I Purchase #35 Chain?
 

if you want to order online i would normally suggest Innovation FIRST but they appear to be out of stock, try McMaster-Carr http://www.mcmaster.com/

Re: Where Could I Purchase #35 Chain?
 

In addition to McMaster-Carr, MSC Direct sells roller chain, as does Motion Industries and Grainger.

Re: Where Could I Purchase #35 Chain?
 

www.mscdirect.com also have chain, but only in 10' lengths.

Re: Where Could I Purchase #35 Chain?
 

We purchase the chain at a local hardware store such as Lowes or Home Depot. They also have the links in stock. We do use McMaster Carr. They ship very fast with credit card purchase. Most places require you to purchase at least 10' in the box.

Re: Where Could I Purchase #35 Chain?
 

Stock Drive Products sells #25 and #35 chain as well.

Re: Where Could I Purchase #35 Chain?
 

I'll second Lowe's; if you need it fast, hit the hardware section.

Re: Where Could I Purchase #35 Chain?
 

Small Parts Inc also carries it. :)

Re: Where Could I Purchase #35 Chain?
 

Tractor Supply Co. They usually have a number of different sizes & if you have one in your area they also have 1/2 links & master links. (cheaper prices also, farmers don't pay more than the generally have to)

Re: Where Could I Purchase #35 Chain?
 

while on this thread anyone know where to get #25 aluminum sprockets?

Re: Where Could I Purchase #35 Chain?
 

id try IFI, Mcmaster-Carr, and/or Andy Mark

www.ifirobotics.com
www.Mcmastercarr.com
www.andymark.biz

Re: Where Could I Purchase #35 Chain?
 

ifi only has #35
mcmaster carr has #25 but not aluminum
and andymark only has #35

Re: Where Could I Purchase #35 Chain?
 

ok my bad, depending on the size, and tooth count you want, you should be able to get them at bike stores with the performance parts

Re: Where Could I Purchase #35 Chain?
 

Bicycle chain is not ANSI #25 chain. It has a 1/2" pitch, whereas #25 chain has a 1/4" pitch.

Re: Where Could I Purchase #35 Chain?
 

I go to a local lawn mower shop to get the chain.

Re: Where Could I Purchase #35 Chain?
 

Why online? You'll be able to suggest that you're from a FIRST team and deserve a discount, if you speak to them by phone, or better, in person. (It works.)

Canadian Bearings (They have lots of stock.)
Motion Industries
Ontario Belting and Power Transmission (These guys also have a Scarborough location.)

And places like Brafasco or Fastenal might also sell it. Call ahead to confirm stock. McMaster-Carr, SDP/SI also sell it, but you'll pay a premium, both because they don't specialize in it, and because it's shipped from the U.S..

Re: Where Could I Purchase #35 Chain?
 

best quality chain is form mcmaster-carr we have used it and have never had a problem with it, no breaks or snags

Re: Where Could I Purchase #35 Chain?
 

WM Berg has .250 pitch (#25) sprockets in 2024 Aluminum from 9 to 54 teeth in standard tooth counts. They all have a 1/2" diameter hub and a 1/4" bore. The part number is 25EM26A-X where X is the tooth count. They are a little more expensive than steel sprockets but they're really not too bad. They don't appear to be well stocked though. On some tooth counts there is a lead time of like 2 weeks.

Re: Where Could I Purchase #35 Chain?
 

#35 chain - Northern Tool $10/box of 10 feet w/ one master link: http://www.northerntool.com/webapp/w...9474_200139474

#35 chain - Surplus Center $13/box of 10 feet w/ one master link: http://www.surpluscenter.com/item.as...ame=powerTrans

#35 chain - Surplus Center various other types (double, stainless, etc.): http://www.surpluscenter.com/sort.as...k eyword=PC35

#35 links - Surplus Center ($.35 master links, etc.): http://www.surpluscenter.com/sort.as...k eyword=PL35

Surplus Center also has sprockets and other stuff cheaper than McMaster-Carr and MSC.

I have used the chain and links from Northern Tool and Surplus Center and it works fine. No failures at all. It is not Browning but doesn't cost as much either.

BTW: Nothern Tool is also a good place for wheels and sprockets. Look around in their Go-Cart parts section.

Also, don't forget a chain breaker like this: http://www.surpluscenter.com/item.as...i tem=14-1037

It is an invaluable "special tool" for any FIRST tool box!

Re: Where Could I Purchase #35 Chain?
 

Cheaper at Northern Tool :)

Re: Where Could I Purchase #35 Chain?
 

Has anyone found a chain breaker similar to this specifically for 25 chain?

I find that ours often ends up bending the link instead of pushing the pin out, due to the anvil being too large.

Re: Where Could I Purchase #35 Chain?
 

Yep, I think I bought a chain breaker and 4 or 5 boxes of chain at Northern Tool last year and about 100 master links from Surplus Center all for less than $100 which should last a while.

Re: Where Could I Purchase #35 Chain?
 

Nope, I've looked and never found one either. If you find one let us all know!