Re: USB Joystick adapter is here!
These are the values we are getting from the Dashboard plugged directly into the OI. The Chiklet is in the regular mode and on the left analog axis, putting the axis straight up yields max values of 15 or 16 on the Y and also 15 or 16 on the X when the axis is straight to the right. When the axis is straight down and left, we get normal values of 127 on the X and Y. This same phenomenon is occuring on the right analog axis going straight up yields 14 or 15 on the Wheel and 14/15 on the Aux going straight to the right. Going straight to the left we get the normal value of 127 on the Aux and going straight down we also get the normal value of 127 on the wheel. This is mode 2 on the Logitech Dual Action gamepad which is supported according to your manual. We have tried different modes and they yield the same results. As you can see on our Logitech Dual Action gamepad, when the analog sticks on going full up or to the right they yield only a max of 15/16 or 14/15 instead of the full 127 like normal. The joystick itself I believe is NOT defective as I have plugged it directly into the computer, loaded the drivers and it works fine in Windows. Maybe this is a newer hardware revision of the Logitech Dual Action Gamepad? Anyways our team due to this problem is switching to the Wired Xbox 360 controller. Hopefully this is a isolated problem for the Logitech Dual Action gamepad.
|
