Re: 2007 Boilermaker Regional!!!
 

Indy rampees unite! We also will be driving upon our alliance partners after two minutes of ringer-placing excitement.

Re: 2007 Boilermaker Regional!!!
 

team 537 will be attending.

good luck and hope to see you all there!

Re: 2007 Boilermaker Regional!!!
 

Team 1872 from Puerto Rico, we are going to start swimming next friday. :yikes:

Re: 2007 Boilermaker Regional!!!
 

We will se if we keep our ramps or not after St. Louis.

Re: 2007 Boilermaker Regional!!!
 

You guys are gonna need those ramps... 45 is another tube-bot. No ramps here.

AB

Re: 2007 Boilermaker Regional!!!
 

it looks so far that BMR is going to be an arm regional!!!:D :D :D

good for 1501!!!;)

Re: 2007 Boilermaker Regional!!!
 

1024... if you've seen, has an elevator mounted manipulator with several degrees of freedom, capable of scoring on all three levels and changing the orientation of the tube within its gripper. It can also remove tubes from the rack. Nice speedy drivetrain too... software's coming along so multi-mode autonomous as well.

Depending on how many helium baloons we can find (or how good we get at carbon fiber n such), one or two full width ramps.... :rolleyes:

Pics without the bumpers on: Mast Up Mast Down Shot

-q

Re: 2007 Boilermaker Regional!!!
 

well then depending on how things go we may ditch the manipulator and extend the ramps. Those build windows may be fun. :yikes:

Re: 2007 Boilermaker Regional!!!
 

At first when I saw the other pics I thought that gripper might have been too large to be any good but with a tube that gripper doesn't look so oversize.
I like the idea of using the wheels on the end of the fingers... shouldn't have to worry much about popping a tube.

Wish you guys were coming to Palmetto Regional in South Carolina... would like to see that gripper in action.

Well Good Luck and Have FUN! :cool:

Re: 2007 Boilermaker Regional!!!
 

234 is all arm. No ramps here. We may be scoreing tubes till the end in a lot of matches.

I like your reverse engineering in the middle of a thread 829.

Re: 2007 Boilermaker Regional!!!
 

1023 will be attending, for the first time ever! As you can tell by my signature, we have been performing very well over the years and we hope that this year will be our best! We are really confident about our robot and its abilities, as well as tons of support we have from sponsors, parents, mentors, and students. However, we will see how it goes after GLR.

Our robot can score 5-6+ tubes per match (this was unobstructed practice with ideal conditions). We can also hold 1, quite possibly 2 (depending on design) robots onto our ramps.

Re: 2007 Boilermaker Regional!!!
 

Will someone from teams 1760, 1856, 1918, 2081, 2171 and 2277 please contact me at rcwarthog@comcast.net
NE1 who knows these team please ask them to contact me.

Thx :)

Re: 2007 Boilermaker Regional!!!
 

Just to clear things up, Team 461 is attending the boilermaker regional; why wouldnt we be, its our home regional...

Re: 2007 Boilermaker Regional!!!
 

It wouldn't be the same without you.

Re: 2007 Boilermaker Regional!!!
 

141 is coming and were bringing our low, middle and high tube scoring robot and ramps for a table of two :)