Software for Camera if any
 

Quick questions for all the programmers out there =P

I was wondering if there is a program to actually start programming the camera to do its movements. For example, programming it to see the different colors and/or different shapes and sizes

So if possibly you guyz can link it here or send me a message thru email or mail here

email is leave2bleed@hotmail.com

Later and Thanks

Josh Bell
Programmer
FL

Re: Software for Camera if any
 

If you mean the software for the robot, there is a modified verison of the defualt program at a site, if i remember correctly it's www.kevin.org, and from there there is a link to the first programing library or something to that effect, and you will find a file that is labeled as being the cmaera code. Have fun with it, cause I don't think their going to drop it this year :)

Re: Software for Camera if any
 

There's another useful program here: http://zone.ni.com/devzone/cda/epd/p/id/3422
You need labview to use it, but it lets you configure the camera and see whether it is tracking and what it is tracking over a serial connection directly to the computer.

If you need any help with the camera, feel free to PM me...

Good luck and welcome to chiefdelphi

Re: Software for Camera if any
 

Look at the code's other people mentioned here.

Labview is the a great way to calibrate the color tracking values.

From there take the code from kevin.org. That has a built in search and track function which already works that you should start with.

Re: Software for Camera if any
 

I have a good amount of experience with the CMUcams 1 & 2, and with setup/troubleshooting. If you need any help gimme a holler on PM or post.

-Q