Chief Delphi - Programming the vex microcontroller to respond to commands on the serial port

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Programming the vex microcontroller to respond to commands on the serial port (http://www.chiefdelphi.com/forums/showthread.php?t=49561)

crashoverride02

20-10-2006 12:28

Programming the vex microcontroller to respond to commands on the serial port

Right now I'm developing a robot to operate with a vex and a pc controlling the vex. How do I get the Vex to respond to the serial port commands? I've found the JVEX reference and that protocol information doesn't work for the online code nor the hex that they provide. Any advice?

crashoverride02

20-10-2006 14:17

Re: Programming the vex microcontroller to respond to commands on the serial port

So Far I've gotten the robot to initialize and send back the DIN information in online mode
(Note decimal values)
Init: 15 15 8 64 184 4
Request DIN: 170 85 0 0 0 11 0 0

All times are GMT -5. The time now is 10:43.