Chief Delphi - pic: FVC 3144(1138) Teaser

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: FVC 3144(1138) Teaser (http://www.chiefdelphi.com/forums/showthread.php?t=50501)

Jeff K.

15-12-2006 15:36

pic: FVC 3144(1138) Teaser

loading photo ...

Lil' Lavery

15-12-2006 15:37

Re: pic: FVC 3144(1138) Teaser

My assumption is some form of 2-staged arm, each with a tread and a static plate to move the balls into the high goal. Worked pretty well for FVC 116 :cool:

AdamHeard

15-12-2006 18:20

Re: pic: FVC 3144(1138) Teaser

Quote:

Originally Posted by Lil' Lavery (Post 542056)

My assumption is some form of 2-staged arm, each with a tread and a static plate to move the balls into the high goal. Worked pretty well for FVC 116 :cool:

Any pics?

Alex Cormier

15-12-2006 19:27

Re: pic: FVC 3144(1138) Teaser

i am thinking of some mechanism to launch balls into the lower goal while holding onto the atlas ball and grasping the bar.

Synergy1848

15-12-2006 20:03

Re: pic: FVC 3144(1138) Teaser

Quote:

Originally Posted by Alex Cormier (Post 542112)

i am thinking of some mechanism to launch balls into the lower goal while holding onto the atlas ball and grasping the bar.

if your holding the atlas ball and hanging whats to stop someone from turing the platform so the atlas ball is on thier side?
although, the solution for that is of course ball drive on the atlas ball! if you're on your side of the field you get the 2x. and if your only touching the atlas ball and the bar no floor you get the hang.

Alex Cormier

15-12-2006 20:10

Re: pic: FVC 3144(1138) Teaser

Quote:

Originally Posted by Synergy1848 (Post 542121)

if your holding the atlas ball and hanging whats to stop someone from turing the platform so the atlas ball is on thier side?:)

well i didn't point out there is also a little mechanism that is holding the ball on the ground and thus you need to rotate the entire platform while the fricition of the atlas ball too.

....also did i say the ball was in the air?

Jeff K.

15-12-2006 20:17

Re: pic: FVC 3144(1138) Teaser

Quote:

Originally Posted by Synergy1848 (Post 542121)

What about just a simple thing to hold onto the atlas ball and pick it up and over the bar? ;)

Lil' Lavery

15-12-2006 21:44

Re: pic: FVC 3144(1138) Teaser

Quote:

Originally Posted by Stonefan5271138 (Post 542124)

What about just a simple thing to hold onto the atlas ball and pick it up and over the bar? ;)

Still doesn't keep them from rotating the platform at the end of the match to put the atlas ball on their side.

Synergy1848

16-12-2006 09:13

Re: pic: FVC 3144(1138) Teaser

Quote:

Originally Posted by Stonefan5271138 (Post 542124)

What about just a simple thing to hold onto the atlas ball and pick it up and over the bar? ;)

my thought is to hold it above the bar and be able to easily mov it from one side to the other so if they turn the platform you can adjust the ball to be on your side again.

Billfred

16-12-2006 09:21

Re: pic: FVC 3144(1138) Teaser

Quote:

Originally Posted by Synergy1848 (Post 542207)

my thought is to hold it above the bar and be able to easily mov it from one side to the other so if they turn the platform you can adjust the ball to be on your side again.

Even better: Make such adjustments slight enough that gravity will take over when the robot's disabled.

Of course, that can still be beat if another robot's really spinning the platform, but I don't think it'll spin that well for that long.

All times are GMT -5. The time now is 21:41.