Encoder Problem
 

I am using four grayhill encoders for our robot that uses a mecanum drive system. I am using the frc_encoder code from kevin watson. When I download the code unmodified it works just fine and all the encoders give me a reading. When I copy and paste the mecanum drive code into the encoder code only one of the encoders gives me a reading. Any help is much appreciated.

Re: Encoder Problem
 

Can you post the code that doesn't work?

Re: Encoder Problem
 

Attached to this message is the user routines file that doesn't work.

Re: Encoder Problem
 

At a quick glance I dont see anything wrong. To confirm, your sayng when you comment out/dont run Default_Routine() that all 4 encoders work but when you run it only 1 does?

Re: Encoder Problem
 

The "\r\n" part of your printf commands bothers me. Aren't we supposed to use just "\r" and not "\n"?

How does this code differ from what does work?

Re: Encoder Problem
 

It's a carriage return and a line feed. He's constructed it like a Windows text file, which would normally use that escape sequence to mark a new line.

Re: Encoder Problem
 

I have tried commenting out the calll to default routine but it still only will read one encoder. The only difference between my code and the frc_encoder code ist that I have added some mecanum drive code for our robot.

Re: Encoder Problem
 

Could you please post both copies of your code for us to look at.

Re: Encoder Problem
 

Did you add code any where else besides user_routines?

Re: Encoder Problem
 

The new user routines is the one from my earlier post and the old user routines is attached to this message and the only thing i edited between the two codes is the addition of the mecanum drive code.

Re: Encoder Problem
 

Have you tried putting in the frc_encoders code again to see if all the encoders still work?

Re: Encoder Problem
 

When I download the frc_encoders the encoders work great but when I add the mecanum drive code only one encoder will feed back values.

Re: Encoder Problem
 

Try running the 2 through a diff tool to see the difrences in the 2 files. I didnt see anything when I did a quick look, ill check again when I have more time.

Re: Encoder Problem
 

Where would I get a diff tool. I've never even heard of such a thing.

Re: Encoder Problem
 

Not so:

From code that works:
/* SECOND: Set up the I/O pins you want to use as digital OUTPUTS. */
digital_io_17 = OUTPUT; /* Example - Not used in Default Code. */

/* THIRD: Initialize the values on the digital outputs. */
rc_dig_out17 = 0;


From modified code:
/* SECOND: Set up the I/O pins you want to use as digital OUTPUTS. */
digital_io_17 = INPUT; /* Example - Not used in Default Code. */